Design of a Quasi- elliptic Lowpass Filter using A New Defected Ground Structure and Capacitively Loaded Microstrip Line
نویسندگان
چکیده
The modern microwave and millimeter wave communication system demands good filtering characteristics with compact sizes. In this paper the attention has been given towards the design of a good elliptical lowpass filter with sharp transition between passband and stopband, negligible passband insertion loss and wide stop band. A new defected ground structure (DGS) consisting of two square slots connects with a rectangular slot by two thin transverse slots underneath a microstrip line is proposed. In the frequency characteristics of proposed unit pattern provides an attenuation zero close to an attenuation pole. As a result, better transition sharpness, lower passband insertion loss and broader stopband are observed compares to dumbbell DGS. An equivalent lumped L-C network is proposed to model the introduced DGS unit and corresponding L-C parameters are extracted. A 3rd order quasi-elliptic lowpass filter with 1.4 GHz cutoff frequency, 1.7 GHz attenuation pole frequency, negligible passband insertion loss, almost 100 dB/GHz sharpness factor and 1.56GHz passband bandwidth (at -15 dB) is designed by cascading three investigated DGS units of different dimensions under capacitively loaded microstrip line.
منابع مشابه
Compact microstrip lowpass filter with very wide stopband using open stubs loaded with defected front coupled tapers
A novel microstrip lowpass filter is proposed to achieve a very wide stopband and high selectivity as well as compact size. This filter utilizes a resonator with symmetric structure that consists of a transmission line, loaded with open stubs. Each stub ends with a defected taper and these tapers are coupled two by two to generate enhanced capacitances and increase the selectivity. Two units of...
متن کاملDesign of a Two Octave Gysel Power-Divider Using DGS and DMS
This paper proposes a two way L and S band Gysel power divider/combiner that uses line to ground resistors. Step by step methods to obtain a wide isolation and transmission bandwidth are presented. A design that uses five resistors is selected and optimized based on Quasi Newton method. Then the Defected Microstrip Structure (DMS) and Defected Ground Structure (DGS) is used to obtain better tra...
متن کاملA New Defected Ground Structure for Different Microstrip Circuit Applications
In this paper, a microstrip transmission line combined with a new U-headed dumb-bell defected ground structure (DGS) is investigated. The proposed DGS of two U-shape slots connected by a thin transverse slot is placed in the ground plane of a microstrip line. A finite cutoff frequency and attenuation pole is observed and thus, the equivalent circuit of the DGS unit can be represented by a paral...
متن کاملDesign of Compact Multi-Channel Diplexer Using Defected Microstrip Structure
In this paper, two compact quad-channel and six-channel diplexer are designed and fabricated using defected microstrip structure (DMS). This structure is designed for the desired frequency based on the literature reviews. The proposed configuration is composed of a conventional T-junction divider with two pairs of open bended stubs and dual/tri-band filters. In designing dual band filters, a lo...
متن کاملA Comparative Study of Microstrip Bandstop Filters Loaded With Various Dumbbell-Shaped Defected Ground Structure (DGS)
In this paper, a comparative performance of microstrip filters loaded with various dumbbellshaped defected ground structures (DB-DGS) has been studied in terms of their bandstop characteristics. During this course, a new dumbbell shaped DGS having transmetal slit in the connecting slot of the square head in the ground plane has been proposed. This proposed design provides an improved bandstop r...
متن کامل