Preventive and Emergency Control of Power System for Transient Stability Enhancement
نویسندگان
چکیده
This paper presents preventive and emergency control measures for on line transient stability (security) enhancement. For insecure operating state, generation rescheduling based on a real power generation shift factor (RPGSF) is proposed as a preventive control measure to bring the system back to secure operating state. For emergency operating state, two emergency control strategies namely generator shedding and load shedding have been developed. The proposed emergency control strategies are based on voltage magnitudes and rotor trajectories data available through Phasor Measurement Units (PMUs) installed in the systems. The effectiveness of the proposed approach has been investigated on IEEE-39 bus test system under different contingency and fault conditions and application results are presented.
منابع مشابه
Transient Stability Enhancement in Microgrids Including Inverter Interfaced Distributed Generations
With increasing the presence of Microgrids (MGs) in the power systems, investigating the MG stability during transient faults is necessary. This study investigates the transient stability analysis of a MG supplied by multiple inverter interfaced distributed generations (IIDGs) during fault. The transient stability of a MG is highly depends on the IIDGs control strategy. A MG, simulated on Matla...
متن کاملPower System Transient Stability Preventive and Emergency Control
C. R. Fuerte-Esquivel Universidad Michoacana de San Nicolás de Hidalgo, Morelia, Mexico Abstract A general approach to real-time transient stability control is described, yielding various complementary techniques: pure preventive, open-loop emergency, and closed-loop emergency controls. Recent progress in terms of a global transient stability-constrained optimal power flow is presented, yieldin...
متن کاملA Comprehensive Approach to Transient Stability Control: Part I—Near Optimal Preventive Control
A general approach to real-time transient stability control is proposed, and two complementary techniques are devised: one for preventive, the other for emergency control. In this paper, the general transient stability control approach is first revisited then applied to real-time preventive control. The technique consists of shifting active power generation. The amount of power and the machines...
متن کاملPreventive and Emergency Transient Stability Control
A unified approach to transient stability closed-loop control is presented. It relies on the general transient stability method called SIME, from which the Preventive and the Emergency SIMEs are derived. The Preventive SIME uses time-domain simulations of plausible contingencies prior to their occurrence, for the online power system monitoring from the control room. The Emergency SIME, on the o...
متن کاملUsing Neural Network to Control STATCOM for ImprovingTransient Stability
FACTS technology has considerable applications in power systems, such as; improving the steady stateperformance, damping the power system oscillations, controlling the power flow, and etc. STATCOM is oneof the most important FACTS devices used in the parallel compensation, enhancing transient stability andetc. Since three phase fault is widespread in power systems, in this paper STATCOM is used...
متن کامل