Modification of boundary lubrication by oil-soluble friction modifier additives
نویسندگان
چکیده
Yingxi Zhu, Hiroko Ohtani , Michael L. Greenfield, Marina Ruths, and Steve Granick Department of Materials Science and Engineering, University of Illinois, Urbana, Illinois 61801 USA Physical and Environmental Sciences Department, Ford Research and Advanced Engineering, Dearborn, Michigan, 48121 USA Department of Chemical Engineering, University of Rhode Island, Kingston, Rhode Island 02881 Department of Physical Chemistry, Åbo Akademi University, Porthansgatan 3–5, FIN-20500 Åbo, Finland
منابع مشابه
Energy efficient reduced graphene oxide additives: Mechanism of effective lubrication and antiwear properties
Optimized concentration of reduced graphene oxide (rGO) in the lube is one of the important factors for effective lubrication of solid body contacts. At sufficiently lower concentration, the lubrication is ineffective and friction/wear is dominated by base oil. In contrast, at sufficiently higher concentration, the rGO sheets aggregates in the oil and weak interlayer sliding characteristic of g...
متن کاملlndustrial Lubricants, Cleaning Processes and Waste Minimization
Lubricant selection and cleaner chemistry is oftentimes one of the most overlooked parts of industrial metal processing. Their selection can affect not only the ability to adequately clean parts; it can also potentially affect the success of a waste minimization effort to recycle the cleaner. Certain lubricants are more compatible with certain cleaning processes than others. This paper will dis...
متن کاملPhosphorus Reduction in Plain and Fully Formulated Oils Using Fluorinated Additives
The reduction of phosphorus and sulfur in engine oil are the main topics of this paper. Very reproducible boundary lubrication tests were conducted as part of Design of Experiment software (DOE) to study the behavior of fluorinated catalyst iron fluoride (FeF3), and polutetrafluoroethylene or Teflon (PTFE) in developing environmentally friendly (reduced P and S) anti-wear additives for future e...
متن کاملFriction and wear behavior of thioether hydroxy vegetable oil
This work describes the tribochemical evaluation of vegetable oil based antiwear additive obtained through chemical modification. The Sulfur was incorporated using a chemical reaction of epoxidized vegetable oil and common thiols, resulting in formation of a hydroxy thioether derivative of vegetable oils. The synthesis retains the vegetable oil structure, eliminates poly-unsaturation in the mol...
متن کاملRole of Surface Texture on Friction and Wear under Boundary Lubricated Conditions
Ensuring effective lubrication between sliding surfaces is one of the challenges in the field of tribology. In addition to the conventional parameters like speed, load, contact geometry and material parameters, the surface texture also influences the coefficient of friction. In the present investigation, the effect of surface texture on coefficient of friction under boundary lubricated conditio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003