Inverse Engineering

GMDH Type Neural Networks and Their Application to the Identification of the Inverse Kinematics Equations of Robotic Manipulators (RESEARCH NOTE)

Inverse feasible problem

In many infeasible linear programs it is important to construct it to a feasible problem with a minimum pa-rameters changing corresponding to a given nonnegative vector. This paper defines a new inverse problem, called “inverse feasible problem”. For a given infeasible polyhedron and an n-vector a minimum perturba-tion on the parameters can be applied and then a feasible polyhedron is concluded.

Single Image Dehazing Algorithm Based on Dark Channel Prior and Inverse Image

The sky regions of foggy image processed by all the existing conventional dehazing methods are degraded by color distortion and severe noise. This paper proposes an improved algorithm which combines dark channel prior and inverse image. We first invert the foggy image, and then estimate the transmission of the inverse image. At last, compared with the non-inversed transmission, the larger value...

Development of a Moving Finite Element-Based Inverse Heat Conduction Method for Determination of Moving Surface Temperature

A moving finite element-based inverse method for determining the temperature on a moving surface is developed. The moving mesh is generated employing the transfinite mapping technique. The proposed algorithms are used in the estimation of surface temperature on a moving boundary with high velocity in the burning process of a homogenous low thermal diffusivity solid fuel. The measurements obtain...

An Analytical Solution for Inverse Determination of Residual Stress Field

An analytical solution is presented that reconstructs residual stress field from limited and incomplete data.  The inverse problem of reconstructing residual stresses is solved using an appropriate form of the airy stress function.  This function is chosen to satisfy the stress equilibrium equations together with the boundary conditions for a domain within a convex polygon.  The analytical solu...

Estimating the unknown heat flux on the wall of a heat exchanger internal tube using inverse method

In the design of heat exchangers, it is necessary to determine the heat transfer rate between hot and cold fluids in order to calculate the overall heat transfer coefficient and the heat exchanger efficiency. Heat transfer rate can be determined by inverse methods. In this study, the unknown space-time dependent heat flux imposed on the wall of a heat exchanger internal tube is estimated by app...