Real Time In-circuit Condition Monitoring of MOSFET in Power Converters
نویسندگان
چکیده
This paper presents simple and low-cost, real time in-circuit condition monitoring of MOSFET in power electronic converters. Design metrics requirements like low cost, small size, high power factor, low percentage of total harmonic distortion etc. requires the power electronic systems to operate at high frequencies and at high power density. Failures of power converters are attributed largely by aging of power MOSFETs at high switching frequencies. Therefore, real time in-circuit prognostic of MOSFET needs to be done before their selection for power system design. Accelerated aging tests are performed in different circuits to determine the wear out failure of critical components based on their parametric degradation. In this paper, the simple and lowcost test beds are designed for real time in-circuit prognostics of power MOSFETs. The proposed condition monitoring scheme helps in estimating the condition of MOSFETs at their maximum rated operating condition and will aid the system designers to test their reliability and benchmark them before selecting in power converters.Copyright © 2015 IFSA Publishing, S. L.
منابع مشابه
Variable Speed Wind Turbine DFIG Back to Back Converters Open-Circuit Fault Diagnosis by Using of Combiniation Signal-Based and Model-Based Methodes
Condition monitoring (CM) and Fault Detection (FD) of wind turbine lead to increase in reliability and availability of turbine. IGBT open circuit of wind turbine converter will bring about depletion in output current of converter and as a result, reduction in production of wind turbine power. In this research, back to back converter IGBT open - gate fault for wind turbine based on DFIG is detec...
متن کاملNecessity of Active Condition Monitoring in Power Electronic Converters
Condition monitoring is currently widely used for industrial equipment to allow predictive maintenance of the equipment. For power electronic converters there currently is no generally accepted and widely deployed condition monitoring method. In this paper the authors investigate the benefits and desirability of condition monitoring.
متن کاملA Class E Power Amplifier with Low Voltage Stress
A new output structure for class E power amplifier (PA) is proposed in this paper. A series LC resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. This resonator causes low impedance at the second harmonic. The output circuit is designed to shape the switch voltage of the class E amplifier and lower the voltage stress of the transistor. T...
متن کاملSEMICONDUCTOR POWER SEMINAR 2008 - 2009 1 MOSFET Selection to Minimize Losses in Low - Output - Voltage DC - DC Converters
This paper focuses on the role of the power MOSFET in achieving high-efficiency converter design. It provides a brief overview of current low-voltage MOSFET trench technologies, along with a discussion about onresistance versus gate charge trade-offs for MOSFETs optimized for use as control or synchronous switches. It covers the importance of the integrated Schottky diode (SyncFETTM MOSFET) in ...
متن کاملIntegrated Preventive and Predictive Maintenance Markov Model for Circuit Breakers Equipped With Condition Monitoring
The Circuit Breaker (CB) is one of the most important equipment in power systems. CB must operate reliably to protect power systems as well as to perform tasks such as load disconnection, normal interruption, and fault current interruption. Therefore, the reliable operation of CB can affect the security and stability of power network. In this paper, effects of Condition Monitoring (CM) of CB on...
متن کامل