The Surface and Optical Properties of Passivated GaSb with Different Passivating Agents
نویسندگان
چکیده
In this paper, (NH4)2S and Na2S were used as passivating agent for the sulphuration treatment of GaSb. Although the oxide layer can be removed by both (NH4)2S and Na2S, the etching rate of Na2S was faster than (NH4)2S, which caused the high RMS. After passivation treatment, PL instensity of GaSb increased, however, if the passivation time was too long, PL instensity would decrease. At low temperature PL spectrum, the emission located at 777meV and 795meV which can be associated with the transition from the conduction band to the native acceptor level VGaGaSb and the other peak corresponds to bound-edge-related transitions can be observed.
منابع مشابه
Ab initio study of the Surface Passivation influence on electronic and optical Properties of (001) SbNSr3 anti-perovskite Surface
In this research, the electronic and optical properties of the (001) surface of SbNSr3 with SbSr and NSr2 terminations and surface passivation impact on electronic properties were investigated. The calculations were done within density functional theory and using pseudo-potential method. HSE hybrid functional was used for exchange correlation potential. The surface calculations were performed t...
متن کاملEnhancement in Light Extraction Efficiency of GaN-Based Light-Emitting Diodes Using Double Dielectric Surface Passivation
SiO2/Al2O3 double dielectric stack layer was deposited on the surface of the GaN-based Light-Emitting Diode (LED). The double dielectric stack layer enhances both the electrical characteristics and the optical output power of the LED because the first Al2O3 layer plays a role of effectively passivating the p-GaN surface and the second lower index SiO2 layer increases the critical angle of the l...
متن کاملColloidal synthesis of germanium nanocrystals
In this study, colloidal germanium nanocrystals were synthesized by a simple and novel method, and their optical properties were also studied. Polyvinyl alcohol (PVA) as a surface modifier was used to control the optical properties of colloidal Ge nanocrystals. Fourier transform infrared spectroscopy (FTIR) analysis was performed to identify the various functional groups present in the sample. ...
متن کاملControl of As diffusion using ultrathin metal passivating layers at GaAs( 100) surfaces
We have performed low-energy cathodoluminescence spectroscopy (eLS) and synchrotron radiation photoemission (SXPS) measurements of Sb-passivated, clean and ordered molecular-beam epitaxy-grown GaAs( 100) surfaces. SXPS measurements show an effective stabilization of the surface As/Ga atomic ratio under annealing for Sb-passivated surfaces, in contrast to the variations in the surface stoichiome...
متن کاملGraphene-enabled silver nanoantenna sensors.
Silver is the ideal material for plasmonics because of its low loss at optical frequencies but is often replaced by a more lossy metal, gold. This is because of silver's tendency to tarnish and roughen, forming Ag(2)S on its surface, dramatically diminishing optical properties and rendering it unreliable for applications. By passivating the surface of silver nanostructures with monolayer graphe...
متن کامل