Mechatronic Development and Dynamic Control of a 3 Dof Parallel Manipulator

Kinematic and Dynamic Analysis of Tripteron, an Over-constrained 3-DOF Translational Parallel Manipulator, Through Newton-Euler Approach

In this research, as the main contribution, a comprehensive study is carried out on the mathematical modeling and analysis of the inverse kinematics and dynamics of an over-constraint three translational degree-of-freedom parallel manipulator. Due to the inconsistency between the number of equations and unknowns, the problem of obtaining the constraint forces and torques of an over-constraint m...

Mechatronic design of a 3-DOF parallel translational manipulator

This paper presents the development steps of a fast manipulator, up to the building of the experimental device, in a context of mechatronic design which implies the integration of several engineering disciplines. High performance of the manipulator has been achieved by means of the suitable integration of the mechanical part and the drive part. For the mechanical part we choose a 3-dof parallel...

Design and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator

This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...

Supervision and Control Strategies of a 6 DOF Parallel Manipulator Using a Mechatronic Approach

Integrator Backstepping Control of a 5 DoF Robot Manipulator with Cascaded Dynamics

In this paper, dynamic equations of motion of a 5 DoF robot manipulator including mechanical arms with revolute joints and their electrical actuators are considered. The application of integrator backstepping technique for trajectory tracking in presence of parameters of uncertainty and disturbance is studied. The advantage of this control technique is that it imposes the desired properties of ...