Controlling the Size of Two-Dimensional Polymer Platelets for Water-in-Water Emulsifiers

نویسندگان

  • Maria Inam
  • Joseph R. Jones
  • Maria M. Pérez-Madrigal
  • Maria C. Arno
  • Andrew P. Dove
  • Rachel K. O’Reilly
چکیده

A wide range of biorelevant applications, particularly in pharmaceutical formulations and the food and cosmetic industries, require the stabilization of two water-soluble blended components which would otherwise form incompatible biphasic mixtures. Such water-in-water emulsions can be achieved using Pickering stabilization, where two-dimensional (2D) nanomaterials are particularly effective due to their high surface area. However, control over the shape and size of the 2D nanomaterials is challenging, where it has not yet been possible to examine chemically identical nanostructures with the same thickness but different surface areas to probe the size-effect on emulsion stabilization ability. Hence, the rationale design and realization of the full potential of Pickering water-in-water emulsion stabilization have not yet been achieved. Herein, we report for the first time 2D poly(lactide) platelets with tunable sizes (with varying coronal chemistry) and of uniform shape using a crystallization-driven self-assembly methodology. We have used this series of nanostructures to explore the effect of 2D platelet size and chemistry on the stabilization of a water-in-water emulsion of a poly(ethylene glycol) (PEG)/dextran mixture. We have demonstrated that cationic, zwitterionic, and neutral large platelets (ca. 3.7 × 106 nm2) all attain smaller droplet sizes and more stable emulsions than their respective smaller platelets (ca. 1.2 × 105 nm2). This series of 2D platelets of controlled dimensions provides an excellent exemplar system for the investigation of the effect of just the surface area on the potential effectiveness in a particular application.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Prediction of the soil-water characteristic curve of dune sand stabilized with SBR polymer and MICP process in the Jabal Kandi area

Introduction The geotechnical engineering problems involving unsaturated soils are included water flow, shear strength and volume change. Soil-water characteristic curve (SWCC) describes the constitutive relationship between soil suction and soil water content. SWCC may be determined directly or indirectly in the laboratory. Because of the various difficulties involved in the direct measuremen...

متن کامل

Two-dimensional Manganese(II) Coordination Polymer Complex Containing Aqua, Diethyl Phosphate and Chloride Ligands: Synthesis, Spectroscopic Characterization, Thermal Analyses, and Crystal Structure

A new two-dimensional manganese(II) coordination polymer, [Mn(μ-DEP)(μ-Cl)(H2O)2]n (1) (DEP is diethyl phosphate), was prepared from the reaction of MnCl2.4H2O and TEP (TEP is triethyl phosphate) ligand in mixture of H2O/CH3OH (1:10) at 40 °C. Suitable crystals of this complex for crystal structure determination were obtained by slow evaporation of the produced colorless solution at room temper...

متن کامل

Fabrication of Gelatin Scaffolds Using Thermally Induced Phase Separation Technique

Gelatin is considered as a partially degraded product of collagen and it is a biodegradable polymer which can be used to produce scaffolds for tissue engineering. Three-dimensional, porous gelatin scaffolds were fabricated by thermally induced phase separation and freeze-drying method. Their porous structure and pore size were characterized by scanning electron microscopy. Scaffolds with differ...

متن کامل

Effect of Inorganic Polymer Gel Systems on Residual Resistance Factor in Fractured Core Model

Excessive water production through fractures become an important problem in oil exploration of fractured reservoirs. For this purpose, polymer gels were prepared by crosslinking of aqueous solutions of polymer and crosslinker for the purpose of water management in high water cut fractured reservoirs. A copolymer of sulfonated polyacrylamide was used as polymer and chromium triacetate (Cr(OA...

متن کامل

A Kinetic study on the dissolution of two naphthalimide based synthesized disperse dyestuffs in the presence of dispersing agents

The controlling kinetics of the water solubility of two synthesized mono azo naphthalimide based disperse dyestuffs in the presence of two different dispersing agents namely Irgasol DAM and lyoprint EV agents at various temperatures were investigated. An exponential rate equation was found to describe the dissolution process. The addition of Irgasol DAM and Lyoprint EV dispersing agents increas...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2018