Simplified Approaches for Controlling Dc-dc Power Converters
نویسنده
چکیده
This paper represents the design procedures of different compensation schemes for voltage mode controlled (VMC) dc–dc switching converters. Proportional integral derivative (PID) controllers, Fuzzy logic controllers (FLC), parallel combination of PID and FLC, and FLC tuned by PI controller have been investigated. MATLAB software is used to depict the buck converter performance with each compensator type when it is electrically simulated, and analytically modeled using its equivalent transfer function (TF). The comparative study Results emphasize that FLC tuned by PI controller is superior to the other control strategies because of fast transient response, minimum steady state error and good disturbance rejection under various variations of the operating conditions. Hence, it achieves the most tightly output voltage regulation.
منابع مشابه
Passivity-Based Control of the DC-DC Buck Converters in High-Power Applications
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to passivity based controller which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with load value and hence...
متن کاملA Repetitive Control- based Approach for Power Sharing among Boost Converters in DC Microgrids
In this paper a repetitive control (RC) approach to improve current sharing between parallel-connected boost converters in DC microgrids is presented. The impact of changes in line impedance on current sharing is investigated. A repetitive controller is designed and connected in series with current controller of the boost converters to control the switching signals such that by regulating of th...
متن کاملPiezoelectric Converters for DC/DC and AC/DC applications
This paper introduces a cutting-edge transformer technology – the piezoelectric transformer – currently considered as a potential candidate to replace magnetic transformers in resonant switching converters. Magnetic transformers are extensively used for providing step-up and step-down voltages while allowing input to output isolation in ac-dc and dc-dc converters. Even with the extensive use, t...
متن کاملDigital Control for Dynamic Performance Enhancement of DC-DC Switching Converters
In this paper, an overview of recent advances in digital control of lowto medium-power dc-dc switching converters is presented. Traditionally, analog electronics methods have dominated in controlling such dc-dc converters. However, with the steadily decreasing cost of ICs, the feasibility of digitally controlled dc-dc switching converters has increased significantly. This paper outlines a sampl...
متن کاملAverage current control of DC-DC Cuk Converters as Power Factor Corrector
The era of electronic devices in all loads due to the manufacturing technologies replaced many conventional electrical or mechanical loads including lighting loads where Light Emitting Diodes (LEDs) is becoming an emerging technique with many advantages. High frequency switching dc-dc converter is a new technology to control the load and the supply side simultaneously. Due to additional harmoni...
متن کامل