Coupled shear-torsional motion of a rubber support system
نویسندگان
چکیده
A~tract. The finite amplitude, coupled shear-torsional motion of a circular disk supported between identical rubber spring cylinders is studied. The material of the springs is assumed to be an incompressible elastic material. The oscillatory motion of the disk is studied for two different cases. In the first case, the material of the spring is assumed to be an incompressible elastic material whose response functions are constants. Typical examples include the Mooney-Rivlin model. The motion of the disk in this case is governed by two independent equations whose closed form solutions are noted. For the second case, the material of the spring is assumed to be an incompressible quadratic material. The motion of the disk in this case is governed by two coupled nonlinear differential equations. The stability properties of small shearing oscillation superimposed on finite torsion and small torsional oscillation superimposed on finite shearing are studied.
منابع مشابه
Coupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades
An approximate numerical mthod is presented for analysis and determination of modal characteristics in straight, pretwisted non-unifom helicopter blades. The analysis considers the coupled flapwise bending (out of plane), chordwise bending (in plane), and torsion vibration of both rotating and non-rotating blades. The proposed method is based on the integral expansion of Green functions (struct...
متن کاملCoupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades
An approximate numerical mthod is presented for analysis and determination of modal characteristics in straight, pretwisted non-unifom helicopter blades. The analysis considers the coupled flapwise bending (out of plane), chordwise bending (in plane), and torsion vibration of both rotating and non-rotating blades. The proposed method is based on the integral expansion of Green functions (struct...
متن کاملDrill string Vibration Modeling Including Coupling Effects
Abstract: The governing equations of motion for a drill string considering coupling between axial, lateral and torsional vibrations are obtained using a Lagrangian approach. The result leads to a set of non-linear equations with time varying coefficients. A fully coupled model for axial, lateral, and torsional vibrations of drill strings is presented. The bit/formation interactions are assumed ...
متن کاملGeneralized Warping In Flexural-Torsional Buckling Analysis of Composite Beams
The finite element method is employed for the flexural-torsional linear buckling analysis of beams of arbitrarily shaped composite cross-section taking into account generalized warping (shear lag effects due to both flexure and torsion). The contacting materials, that constitute the composite cross section, may include a finite number of holes. A compressive axial load is applied to the beam. The...
متن کاملTHE EFFECTS OF ANTERIOR DISCECTOMY AND INTERPOSITION AL IMPLANT UPON LUMBAR MOTION SEGMENT STABILITY
The cadaver spine motion segment behavior under torsional load was evaluated with the disc intact, with partial anterior discectomy and with spacer insertion. The results of this study explain how anterior lumbar discectomy and interbody fusion (ALIF) affects the torsional stability of the motion segment. The pseudarthrosis rate of the anterior lumbar discectomy and interbody fusion (ALIF)...
متن کامل