Differential displacement of soft tissue layers from manual therapy loading.
نویسندگان
چکیده
BACKGROUND Understanding the biomechanics of spinal manipulative therapy requires knowing how loads are transmitted to deeper structures. This investigation monitored displacement at sequential depths in thoracic paraspinal tissues parallel with surface load directions. METHODS Participants were prone and a typical preload maneuver was applied to thoracic tissues. Ultrasound speckle tracking synchronously monitored displacement and shear deformation of tissue layers in a region of interest adjacent to load application to a depth of 4 cm. Cumulative and shearing displacements along with myoelectric activity were quantitatively estimated adjacent to loading site. FINDINGS The cephalocaudal cumulative displacement in layers parallel to the surface were, in order of depth, 1.27 (SD=0.03), 1.18 (SD=0.02), and 1.06 (SD=0.01) mm (P<0.000), respectively. The superficial/intermediate shear was 2.1 ± 2.3% whereas the intermediate/deep shear was 4.4% (SE=3.7, P=0.014). Correlation of tissue layers was stronger with application site displacement at the surface (0.87<r<0.89) than with muscle activation (0.65<r<0.67). INTERPRETATION Surface loading of the torso in combined posteroanterior and caudocephalic directions result in both displacement of tissues anteriorly and in shearing between tissue layers in the plane of the tissues strata to depths that could plausibly affect spinal tissues. Displacements of tissues more likely arise passively, consistent with load transmitted by the retinacula cutis and epimuscular force pathways. Displacements are similar in magnitude to those known to evoke biologically relevant responses in both animal and human studies.
منابع مشابه
Calculation of total dose and dose equivalent distribution in the treatment of lung cancer using MR-guided carbon therapy
Nowadays, in order to improve the accuracy of treatment in radiation therapy, there are many attempts to use magnetic resonance imaging (MRI) due to the advantages of excellent soft tissue contrast and ultra-fast pulse sequences. On the other hand, carbon-ion radiation therapy is developing rapidly due to the benefits of greater relative biological effectiveness (RBE) and the application in the...
متن کاملThe Effect of Combination Therapy; Manual Therapy and Exercise, in Patients With Non-Specific Chronic Neck Pain: A Randomized Clinical Trial
Purpose: Neck pain is one of the most common health problems that its prevalence ranges from 34% to 50%. Chronic Neck Pain (CNP) is also a frequent complaint in the general population. The pathogenesis of nonspecific CNP is not clear. This study aimed to assess the effects of soft tissue release, muscle energy techniques and exercise on neck Range of Motion (ROM), Neck Disability Index (NDI), an...
متن کاملThe Effect of Back Belt on Maximum Displacement and Center of Pressure Velocity in Different Lifting Styles
Purpose: Mechanical loading is said to be an important factor in the development of low back pain (LBP). One of the main concerns in manual material handling (MMH) tasks is lifting loads, as this activity is present in most jobs. Despite the controversy about their effectiveness, belts are used in industry as either protective or assistive devices in manual load handling. The present inve...
متن کاملComparison of Geotextile Layers Effects on Static and Dynamic behavior of Pavement
One of the methods for the improvement of soil against the tensile stresses is using the artificial supplements in soil such as metal belts or nets, polymer materials and natural fibers. Technically this method is called the reinforced of soil. When a pavement is located on soft soil, great deformations can occur as a result of the crossing of traffic load in superstructure layers of the body....
متن کاملLow-speed impact behavior of two-layer similar and dissimilar metal laminate structures
Mechanical behavior of two-layer metal laminate structures under low-speed impact loading was investigated experimentally and numerically. The experimental results were just used for validation of numerical results. Then numerical modeling was used to study the behavior of metal laminates in details. The mechanical behavior of the metal laminate structures under impact loading was found to be d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Clinical biomechanics
دوره 33 شماره
صفحات -
تاریخ انتشار 2016