On the possibility of nonfat frying using molten glucose.

نویسندگان

  • Mohammed Al-Khusaibi
  • Azmil Haizam Ahmad Tarmizi
  • Keshavan Niranjan
چکیده

Fried products impose a health concerns due to considerable amount of oil they contain. Production of snack foods with minimal oil content and good management of oil during frying to minimize the production of toxic compounds continue to be challenging aims. This paper aims to investigate the possibility of producing a fat-free food snack by replacing frying oil with a nonfat medium. Glucose was melted and its temperature was then brought to 185 °C and used to fry potato strips, to obtain a product referred here as glucose fries. The resulting product was compared with French fries prepared conventionally under conditions that resulted in similar final moisture content. The resulting products were also examined for crust formation, texture parameters, color development and glucose content. Stereo microscope images showed that similar crusts were formed in the glucose fries and French fries. Texture parameters were found to be similar for both products at 5 and 2 mm penetration depth. The maximum hardness at 2 mm penetration depth was also similar for both products, but different from cooked potato. The color development that characterized French fries was also observed in glucose fries. The glucose content in glucose fries was found to be twice the content of French fries, which is to be expected because glucose absorbed or adhered to the surface. In conclusion, glucose fries, with similar texture and color characteristics to that of French fries, can be prepared by using a nonfat frying medium.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Process Optimization in Vacuum Frying of Kiwi Slices Using Response Surface Methodology

ABSTRACT: Vacuum deep-fat frying is a new technology that can be used to improve the quality attributes of fried food because of the low temperatures employed and minimal exposure to oxygen. In this paper the effect of frying process parameters, namely frying time, frying temperature and pressure on the quality factors of fried kiwi slices was studied. A laboratory scale vacuum frying apparatus...

متن کامل

Designation of a Palm-Free Frying Oil Formulation Based on Sunflower, Canola, Corn and Sesame Oils Using D-Optimal Mixture Design

Background and Objectives: Oils used in frying should include special characteristics such as high oxidative stability, prolonged shelf life, low price, abundance and availability and desirable flavors. Nowadays, consumers are further interested in low saturated frying oils.  Recently, manufacturers focus on eliminating palm oil derivatives (as a major vegetable source of saturation) from fryin...

متن کامل

Trans Fatty Acid Analysis of Frying Oil Using ATR-FTIR Spectroscopy: A Study on Indian Traditional Snack Foods

Background: Trans Fatty Acid (TFA) content in oil is an important quality parameter due to its adverse health effect. This study was aimed to examine the TFA content in the frying oil used by street food vendors in India for two traditional snack foods. Methods: Totally, 143 oil samples were collected at different frying times (0, 2, and 4 h) from five different vendors for Samosa and Jalebi. ...

متن کامل

Oil absorption reduction of eggplant slices during deep fat frying by applying osmotic dehydration pretreatment

Background and Objectives: A fairly large amount of oil is absorbed to the food during deep frying. The aim of this study was to reduce the oil absorption of eggplant slices during frying by using osmotic dehydration pretreatment. Materials and Methods: Using maltodextrin (0, 20, 40% w/v) and sodium chloride (salt, 0, 10, 20% w/v), the effect of osmotic dehydration on different properties of e...

متن کامل

Kinetic Study of Niobium Carbide Coating Formation on AISI L2 Steel using Thermo-Reactive Deposition Technique

In the present study, Thermo-Reactive Deposition method (TRD) in a molten bath was used to form niobium carbide coating on AISI L2 steel. The coating was formed in five different composition of borax (Na2B4O7), boric acid (B2O3), and ferro-niobium. For all of the five compositions of molten bath, niobium carbide coating treatment was carried out at 1173 K, 1273 K, and 1373 K for 2, 4 and 8 hour...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of food science

دوره 80 1  شماره 

صفحات  -

تاریخ انتشار 2015