Antimicrobial, antibiofilm, and microbial barrier properties of poly (ε-caprolactone)/cloisite 30B thin films
نویسندگان
چکیده
Development of antibacterial and antibiofilm surfaces is in high demand. In this study, nanocomposite of Poly (ε-caprolactone)/Cloisite 30B was prepared by the solvent casting method. The membranes were characterised by SEM, AFM, and FTIR. Evaluation of water uptake, antimicrobial, antibiofilm, and microbial barrier properties demonstrated a significant antimicrobial and antibiofilm activity against MTCC strain of Staphylococcus haemolyticus and strong biofilm positive Staphylococcus epidermidis of clinical origin at low clay concentrations. These membranes acted as an excellent barrier to the penetration of microorganism. These nanocomposites can have promising applications in various fields including packaging.
منابع مشابه
High Solid Contents Copoly (Styrene/Butyl Acrylate)-Cloisite 30B Nanocomposites
Higher solid contents (20 % and 40 %) nanocomposites of poly (styrene-co-butyl acrylate) including higher content of Cloisite 30B (7 wt% and 10 wt %) were prepared via miniemulsion polymerization. Stability of the final latexes proved outstanding combination of polymerization procedure and surfactants. Morphological studies revealed by TEM, SAX and XRD showed three structures of core-shell, arm...
متن کاملEffects of clay type and content on mechanical, water barrier and antimicrobial properties of agar-based nanocomposite films
Brittleness and other properties such as low thermal stability, medium gas barrier properties and low solvent resistance (e.g., against water) of the pure biopolymer film are often insufficient for food packaging applications. The nanoscale distribution of nanoclays (such as montmorillonite, saponite or hectorite), with a high aspect ratio (100-1,500) and extremely high surface-to-volume ratio ...
متن کاملKinethical Aspects of High Solid Contents Copoly(Styrene/Butylacrylate)-Cloisite 30B Nanocomposites
High solid content poly (styrene-co-butyl acrylate) latex ( with 20% and 40% solid content) including high amounts of Cloisite 30B (7 wt% and 10 wt%) were kinetically investigated. Gravimetric method via measuring the rate of polymerization, number of particles and average number of radicals per particle was used. Results showed that by increasing the solid content; the average diameter of poly...
متن کاملEffect of type and content of modified montmorillonite on the structure and properties of bio-nanocomposite films based on soy protein isolate and montmorillonite.
The nonbiodegradable and nonrenewable nature of plastic packaging has led to a renewed interest in packaging materials based on bio-nanocomposites (biopolymer matrix reinforced with nanoparticles such as layered silicates). Bio-nanocomposite films based on soy protein isolate (SPI) and modified montmorillonite (MMT) were prepared using melt extrusion. The effect of different type (Cloisite 20A ...
متن کاملInvestigating the effects of chemical modification of clay nanoparticles on thermal degradation and mechanical properties of TPU/nanoclay composites
Thermoplastic polyurethane (TPU)/clay nanocomposites were prepared via a melt-compounding method using ester type TPU and two different modified organoclays (Cloisite 30B and Cloisite 15A) in different contents. The Effects of the chemical structure and content of the nanoclays on the thermal degradation and mechanical properties of TPU were also investigated. The effect of structural modificat...
متن کامل