Application of Taguchi Technique in Gas Cutting Process - A Case Study
نویسنده
چکیده
This paper offers a different view of quality that has traditionally been used. Uniformity of products is of greater concern than just conformance to specifications. Improvement in quality by reducing the number of defectives is a goal every organization likes to pursue. However, the reduction of defectives requires an additional investment in procuring suitable technology and training of employees. Small scale industries with their resource crunch are at disadvantage because of this. Taguchi is a simplified way to overcome this problem. This work includes a detailed description of taguchi methodology. The statistical tool for the analysis of the analysis of the data (ANOVA) and the concept of orthogonal array are also dealt with. An attempt has been made to implement the 16-step methodology of taguchi in gas cutting. The results and verification of those results using Qualitek-4 software are also presented.
منابع مشابه
Using Gray Relational Analysis and Taguchi Technique in Solving Multi-objective Problems for Turning Operation of Austenitic Stainless Steel
In this study, the application of gray relational analysis (GRA) and Taguchi method in multi-criteria process parameters selection of turning operation has been investigated. The process responses under study are material removal rate (MRR) and surface roughness (SR); in turn, the input parameters include cutting speed, feed rate, depth of cut and nose radius of the cutting tool. The proposed a...
متن کاملApplication of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts
Face milling is an important and common machining operation because of its versatility and capability to produce various surfaces. Face milling is a machining process of removing material by the relative motion between a work piece and rotating cutter with multiple cutting edges. It is an interrupted cutting operation in which the teeth of the milling cutter enter and exit the work piece during...
متن کاملOptimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
متن کاملExperimental Investigation on Gas Laser Cutting
Laser beam cutting (LBC) is a most predominantly used non-traditional cutting process to cut desired shapes out of sheet metals, plates, sections and boxes with greater accuracy at least time. The criticality in this process is its complexity in cutting non ferrous materials due to their lesser absorption rate of the laser beam. Continuous wave CO2 laser and pulsed Nd:YAG laser are the most com...
متن کاملA Case Study to Setup Optimum Process Parameters in Thermal Deburring for Removing the Burr in Barrel of Fuel Injector
– Deburring is the finishing technique that is very essential for the manufacturing of precise components. Deburring process with greater efficiency and full automation is an extremely difficult task. Thermal deburring offers a potential solution to such problems. For successful utilization of thermal deburring, more intensive research including parameters analysis of the process is still requi...
متن کامل