Dsp Based Implementation of Field Oriented Control of Three-phase Induction Motor Drives
نویسندگان
چکیده
Abstract The objective of this paper is to presents a practical implementation of field oriented control of three-phase induction motor based on Space Vector Pulse Width Modulation technique using Digital Signal Processing (DSP) board TMS320F2812. The control algorithm for the drive application is built with Code Composer Studio version 3.1. The motor control is divided into two control loops; inner current loop and outer speed control loop using PI controller. The rotor flux quantities are estimated using computational rotor time constant, rotor angular velocity and stator current. As a feedback of field oriented control, an incremental encoder is attached at the motor shaft and a Hall effect current sensor is used to detect the sent current to the motor. The performance of the drives system is tested under different speed command and load disturbances
منابع مشابه
DSP-Based Field-Oriented Step Motor Control
The SMC3 motor drive has been built using an Analog Devices ADSP-2101 digital signal processor (DSP). The SMC3 is designed to work with two-phase step motors, which are permanent magnet motors with many (typically 100) poles. The firmware in the SMC3 DSP drives the step motor phase windings using field-oriented control rather than using single steps. This method derives the maximum theoretical ...
متن کاملSensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives
The sensorless model predictive force control (SMPFC) is a strong method for controlling the drives of three-phase 4(6)-switch inverter linear induction motors. This kind of inverter can be employed for fault tolerant control in order to solve the problem of open/short circuit in 6-switch inverters (B6). This paper proposed a method for the SMPFC of a linear induction motor (LIM) with a 4-switc...
متن کاملDesign and Implementation of a High-Precision Position Controller for Permanent Magnet Synchronous Motor Based on a New Gain Scheduling Approach
The direct drive permanent magnet synchronous motor (DD-PMSM) is a suitable choice for high-precision position control applications. Among various control methods of this motor, the vector control approaches especially the field oriented control has a high-performance in the industrial drives. In this method, the components of stator current are controlled independently and as a result, the tor...
متن کاملA Current-Based Output Feedback Sliding Mode Control for Speed Sensorless Induction Machine Drive Using Adaptive Sliding Mode Flux Observer
This paper presents a new adaptive Sliding-Mode flux observer for speed sensorless and rotor flux control of three-phase induction motor (IM) drives. The motor drive is supplied by a three-level space vector modulation (SVM) inverter. Considering the three-phase IM Equations in a stator stationary two axis reference frame, using the partial feedback linearization control and Sliding-Mode (SM) c...
متن کاملRobust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks and Sliding Mode Flux Observers
In this paper, using the three-phase induction motor fifth order model in a stationary twoaxis reference frame with stator current and rotor flux as state variables, a conventional backsteppingcontroller is first designed for speed and rotor flux control of an induction motor drive. Then in orderto make the control system stable and robust against all electromechanical parameter uncertainties a...
متن کامل