Wind farm node connected DFIG/back-to-back converter coupling transient model for grid integration studies
نویسندگان
چکیده
This paper presents the explicit electromagnetic transient model of a Doubly Fed Induction Generator (DFIG), that includes its coupling with the back-to-back converter, when the generator/converter set is connected to the wind farm’s Thevenin equivalent, as seen from DFIG’s terminals. Besides that, DFIG’s grid side converter control system is defined in detail, so that expressions for the direct tuning of all compensators are provided. The overall electromechanical wind generator model includes 24 state variables: four mechanical, eleven electrical, and nine more – one for each controller – associated to the control system. The developed model is complemented with a state machine that implements the sequential control among the different stages that define its operational modes. Simulation and experimental results show that the developed model is able to predict the behaviour of the generator in short and long term scenarios. 2015 Elsevier Ltd. All rights reserved.
منابع مشابه
GA-Based Optimal LQR Controller to Improve LVRT Capability of DFIG Wind Turbines
Nowadays, the doubly-fed induction generators (DFIGs) based wind turbines (WTs) are the dominant type of WTs connected to grid. Traditionally the back-to-back converters are used to control the DFIGs. In this paper, an Indirect Matrix Converter (IMC) is proposed to control the generator. Compared with back-to-back converters, IMCs have numerous advantages such as: higher level of robustness, re...
متن کاملVariable Speed Wind Turbine DFIG Back to Back Converters Open-Circuit Fault Diagnosis by Using of Combiniation Signal-Based and Model-Based Methodes
Condition monitoring (CM) and Fault Detection (FD) of wind turbine lead to increase in reliability and availability of turbine. IGBT open circuit of wind turbine converter will bring about depletion in output current of converter and as a result, reduction in production of wind turbine power. In this research, back to back converter IGBT open - gate fault for wind turbine based on DFIG is detec...
متن کاملPower Control of DFIG Using Back to Back Converters (PWM Technique)
Wind is one of the most widely used nonconventional sources of energy. A back-to-back PWM converter is used as the excitation power supply for the doubly fed induction generator (DFIG) wind power generation of variable speed constant frequency (VSCF).The Simulink model and control strategy of converter which is connected between rotor and grid is analyzed. Stator-flux oriented vector control ap...
متن کاملModeling and Simulation of Grid Connected Wind Energy Conversion System Based on a Doubly Fed Induction Generator (DFIG)
This paper deals with the analysis, modeling, and control of a grid connected doubly-fed induction generator (DFIG) driven by the wind turbine. Recent advancements in size and technology of wind turbines require sophisticated control systems to effectively optimize energy conversion and enhance grid integration. This article investigates the power flow analysis of grid connected Wind Energy Con...
متن کاملPower Quality Improvement Using Grid Side Converter of Wind Energy Conversion System
This paper presents the control of a WECS (wind energy conversion system), equipped with a DFIG (doubly fed induction generator), for maximum power generation and power quality improvement simultaneously. The proposed control algorithm is applied to a DFIG whose stator is directly connected to the grid and the rotor is connected to the grid through a back-to-back AC-DC-AC PWM (pulse width modul...
متن کامل