Hot-Carrier-Induced Degradation for Partially Depleted SOI 0.25–0.1 m CMOSFET With 2-nm Thin Gate Oxide

نویسندگان

  • Wen-Kuan Yeh
  • Wen-Han Wang
  • Yean-Kuen Fang
  • Mao-Chieh Chen
  • Fu-Liang Yang
چکیده

Hot-carrier-induced degradation of partially depleted SOI CMOSFETs was investigated with respect to body-contact (BC-SOI) and floating-body (FB-SOI) for channel lengths ranging from 0.25 down to 0.1 m with 2 nm gate oxide. It is found that the valence-band electron tunneling is the main factor of device degradation for the SOI CMOSFET. In the FB-SOI nMOSFET, both the floating body effect (FBE) and the parasitic bipolar transistor effect (PBT) affect the hot-carrier-induced degradation of device characteristics. Without apparent FBE on pMOSFET, the worst hot-carrier stress condition of the 0.1 m FB-SOI pMOSFET is similar to that of the 0.1 m BC-SOI pMOSFET.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Temperature Dependence of Hot-Carrier-Induced Degradation in 0.1 m SOI nMOSFETs With Thin Oxide

This letter investigates hot-carrier-induced degradation on 0.1 m partially depleted silicon-on-insulator (SOI) nMOSFETs at various ambient temperatures. The thermal impact on device degradation was investigated with respect to body-contact nMOSFETs (BC-SOI) and floating-body SOI nMOSFETs (FB-SOI). Experimental results show that hot-carrier-induced degradation on drive capacity of FB-SOI device...

متن کامل

Hot-Carrier Reliability of P-MOSFET with Ultra-Thin Silicon Nitride Gate Dielectric

The degradation of 100 nm effective channel length pMOS transistors with 14 A equivalent oxide thickness JVD Si3N4 gate dielectric under hot-carrier stress is studied. Interface-state generation is identified as the dominant degradation mechanism. Hot-carrier-induced gate leakage may become a new reliability concem. Hot-carrier reliability of 14 A Si3N4 transistors is compared to reliability of...

متن کامل

A 0.25- m, 600-MHz, 1.5-V, Fully Depleted SOI CMOS 64-Bit Microprocessor

A 0.25m, four-layer-metal, 1.5-V, 600-MHz, fully depleted (FD) silicon-on-insulator (SOI) CMOS 64-bit ALPHA1 microprocessor integrating 9.66 million transistors on a 209-mm silicon die has been developed leveraging the existing bulk design. FD-SOI technology is used because it has better immunity for dynamic leakage current than partially depleted SOI in highspeed dynamic circuits without body ...

متن کامل

Hole injection enhanced hot-carrier degradation in PMOSFETs used for systems on chip applications with 6.5-2 nm thick gate-oxides

Hot-carrier reliability is studied in core logic PMOSFETs with a thin gate-oxide (Tox 1⁄4 2 nm) and in Input/Output PMOSFETs with a thick gate-oxide (6.5 nm) used for systems on chip applications. Hot-hole (HH) injections are found to play a more important role in the injection mechanisms and in the degradation efficiency. This depends on the technology node for stressing voltage conditions cor...

متن کامل

The impact of interface/border defect on performance and reliability of high-k/metal-gate CMOSFET

The impact of interface/border defect on performance and reliability was investigated for gate-first and gate-last high-k/metal-gate CMOSFET. For high-k/metal-gate CMOSFET, VFB roll-off is critical as effective oxide thickness (EOT) scales below 15 angstrom (Å) especially for metal gate-first device with an extra capping layer to adjust VTH. By proposing a model of metal-gate process induced in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001