Design and implementation of an observer controller for a buck converter
نویسندگان
چکیده
An observer controller for a buck converter is presented. A state feedback gain matrix is derived in order to achieve the stability of the converter and to ensure the robustness of the controller. A load estimator is designed to estimate the unmeasurable variables and to obtain the zero output voltage error. A pulse-width modulation scheme is adopted to obtain the output voltage regulation. In order to improve the transitory response and dynamic constancy of the converter, the controller parameters are designed based on the current mode control. The design is evaluated and verified using MATLAB/Simulink. An experimental set-up is done to evaluate the controller platform.
منابع مشابه
Digital Controller Designbased on Time Domain for DC-DC Buck Converter
In this paper, the digital controller design for compensating the dc-dc buck converter output voltage has been analyzed in the digital domain. The main idea of this paper is patterning the samples of high order ideal controller and using integral square error in determining digital PID coefficients. This approach provides higher precision of digital controller design and eliminates the need for...
متن کاملNonlinear Controller Design of Reducing Converter and Minor Changes to Load
In this paper, some Contents are presented to simulate the nonlinear converter of the Buck converter. In general, the Buck converter and studies done on it and a control method to obtain the average output voltage for equality with an optimum level, Provided control method includes a series of advantages and disadvantages. To improve disadvantages And also a better result on the output The line...
متن کاملDesign and Implementation of Discrete Time Observer Based Backstepping Controller for a 2DOF Servomechanism
The two degrees of freedom servomechanism has many applications, including in gimbaled seekers. These mechanisms require closed-loop control to perform properly. In this paper, an observer-based multi-input-multi-output hybrid controller is designed for a two-degree-of-freedom servomechanism. Since in the model presented in this paper, disturbances on the mechanism are considered, so an extende...
متن کاملA Buck-Boost Converter; Design, Analysis and Implementation Suggested for Renewable Energy Systems
This work introduces a new non-isolated buck-boost DC-DC converter. Interleaved configuration of the suggested structure increases the voltage conversion ratio. The voltage rate of the suggested converter can be stepped-up and stepped down for lower values of duty-cycle, which causes to decrease in the conduction losses of the system. The voltage conversion ratio of the recommended structure is...
متن کاملFractional Modeling and Analysis of Buck Converter in CCM Mode Peration
In this paper fractional order averaged model for DC/DC Buck converter in continues condition mode (CCM) operation is established. DC/DC Buck converter is one of the main components in the wind turbine system which is used in this research. Due to some practical restriction there weren’t exist input voltage and duty cycle of converter therefor whole of the wind system was simulated in Matlab/Si...
متن کامل