Impact of artificial ageing process on the wear resistance of dental materials
نویسنده
چکیده
منابع مشابه
Biotribology of a vitamin E-stabilized polyethylene for hip arthroplasty - Influence of artificial ageing and third-body particles on wear.
The objective of our study was to evaluate the influence of prolonged artificial ageing on oxidation resistance and the subsequent wear behaviour of vitamin E-stabilized, in comparison to standard and highly cross-linked remelted polyethylene (XLPE), and the degradation effect of third-body particles on highly cross-linked remelted polyethylene inlays in total hip arthroplasty. Hip wear simulat...
متن کاملWear comparison between three types of Brelian, Super brelian and Ivocolar artificial teeth ( In - vitro)
Wear comparison between three types of Brelian, Super brelian and Ivocolar artificial teeth ( In - vitro) Dr. S. SH. Shayegh * - Dr. M. Ghorbanian ** * - Assistant Professor of Dental Prosthodontics Dept. - Faculty of Dentistry – Shahed University. ** - Dentist. Background and Aim: Wear is one of the main problems of acrylic teeth that creates a lot of problems for both patient and dentist. The...
متن کاملThe Influence of Heat Treatment and High Energy Ball Milling on the Density, Hardness, and Wear Behavior of Al 7150 Alloy via Hot Uniaxial Compaction
The effect of the milling time & ageing on the hardness, density, and wear characteristics of Al 7150 alloy specimens made via powder metallurgy has been studied. The different constituents of Al 7150 alloy were processed in a planetary ball milling set up with a BPR of 10:1 for 5 hours, 10 hours, and 20 hours. At 400 °C, the milled powders were subsequently hot compacted in a punch die setup. ...
متن کاملImproving the surface wear resistance of aluminum by electrical discharge process
In this study electrical discharge process was used to increase surface wear resistance of pure aluminum. Pulse-on-time and pulse current were considered as input parameters of the electrical discharge process. Experimental results reveal that the electrical discharge process is a successful method for improving the surface wear resistance of aluminum, so that this method has greatly increased ...
متن کاملComparative study of degradation of PP modified with organic pro-degradant subjected to natural and artificial ageing
In abiotic degradation the action of light radiation is one of the most important parameters, because polymers undergo degradation due to the action of light (natural or artificial). The aim of this study was to investigate the degradation rate for samples of polypropylene (PP) modified with an organic pro-degradant submitted to ageing in a natural environment and to accelerated ageing test. Th...
متن کامل