Incorporation of vitamin E in poly(3hydroxybutyrate)/Bioglass composite films: effect on surface properties and cell attachment.
نویسندگان
چکیده
This study investigated the possibility of incorporating alpha-tocopherol (vitamin E) into poly(3hydroxybutyrate) (P(3HB))/Bioglass composites, which are being developed for bone tissue engineering matrices. P(3HB) films with 20 wt% Bioglass and 10 wt% vitamin E were prepared using the solvent casting technique. Addition of vitamin E significantly improved the hydrophilicity of the composites along with increasing the total protein adsorption. The presence of protein adsorbed on the composite surface was further confirmed using X-ray photoelectron spectroscopy analysis. Preliminary cell culture studies using MG-63 human osteoblasts showed that the addition of vitamin E in the P(3HB)/20 wt% Bioglass films significantly increased cell proliferation. The results achieved in this study confirmed the possibility of incorporating vitamin E as a suitable additive in P(3HB)/Bioglass composites to engineer the surface of the composites by promoting higher protein adsorption and increasing the hydrophilicity.
منابع مشابه
Improvement Physical Properties of Pullulan-Whey Protein Biocomposite Films with Nanoclay
In the current study, whey protein- pullulan- clay nanocomposite films are prepared by casting method. The effect of nanoclay at three concentrations (1%, 3% and 5%) on physical properties such as moisture content, solubility in water, water vapor permeability and transparency of whey protein- pullulan composite films investigated. The results show that the effect of nanoparticles on composite ...
متن کاملImprovement Physical Properties of Pullulan-Whey Protein Biocomposite Films with Nanoclay
In the current study, whey protein- pullulan- clay nanocomposite films are prepared by casting method. The effect of nanoclay at three concentrations (1%, 3% and 5%) on physical properties such as moisture content, solubility in water, water vapor permeability and transparency of whey protein- pullulan composite films investigated. The results show that the effect of nanoparticles on composite ...
متن کاملInvestigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application
CdTe thin films with 2.8 µm thickness were deposited by electron beam evaporation method. X-ray diffraction, scanning electron microscopy, UV-Vis-NIR spectroscopy and atomic force microscopy (AFM) were used to characterize the films. The results of AFM analysis revealed that the CdTe films have uniform surface. CdTe thin films were heat-treated by SnCl2 solution. Structural analysis using XRD s...
متن کاملAntimicrobial properties and permeability of Poly lactic Acid nanocomposite films containing Zinc Oxide
Objective(s): Since microbial contamination can reduce the shelf life of the foodstuff and there is a potential for the growth of some pathogen microorganisms, films containing antimicrobial agents were produced, which are also biodegradable. In this study, the effect of 1, 3 and 5% nano-zinc oxide on antimicrobial properties and permeability of poly lactic acid film was invest...
متن کاملEffect of Using Cold Plasma Treatment on the Surface and Physicochemical Properties of Starch-chitosan Composite Film
Background and Objectives: Cold plasma is an eco-friendly and non-thermal technique, which has become an important technology to change the physical and chemical features of polymers. Recently, cold plasma has been considered in the decontamination and modification of packaging materials in the food industry. Therefore, the objective of this study was to survey the effect of using low-pressure ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of the Royal Society, Interface
دوره 6 33 شماره
صفحات -
تاریخ انتشار 2009