Sterilization by dry heat.
نویسندگان
چکیده
The advantages and disadvantages of three forms of dry heat sterilization are discussed. In addition a fourth method, consisting of heating by infrared rays in vacuo, is described. This method is particularly suitable for instruments used in the operating theatre, since it can replace an autoclave where a supply of steam is not available. Recommended times and temperatures for dry heat sterilization are detailed, and are related to the thermal death point of Cl. tetani. The dangers of recontamination during the cooling process are discussed.
منابع مشابه
بررسی اثر استریلیزاسیون خشک و مرطوب بر سایش لیگاچرکاترهای ارتودنتیک
Background and Aim: Orthodontic ligature cutting pliers are expensive. Methods of sterilization should be safe considering patients' health as well as lifetime of orthodontic pliers. The purpose of this study was to compare the wear of orthodontic ligature cutting pliers after sterilizing with dry heat or steam autoclave. Materials and Methods: In this experimental study, thirty ligature cuttin...
متن کاملSterilization by Gamma Irradiation
Sterilization is defined as any process that effectively kills or eliminates almost all microorganisms like fungi, bacteria, viruses, spore forms. There are many different sterilization methods depending on the purpose of the sterilization and the material that will be sterilized. The choice of the sterilization method alters depending on materials and devices for giving no harm. These steriliz...
متن کاملInfluence of Microwave Sterilization on the Cutting Capacity of Carbide Burs
OBJECTIVE This study compared the cutting capacity of carbide burs sterilized with microwaves and traditional sterilization methods. MATERIAL AND METHODS Sixty burs were divided into 5 groups according to the sterilization methods: dry heat (G1), autoclave (G2), microwave irradiation (G3), glutaraldehyde (G4) or control - no sterilization (G5). The burs were used to cut glass plates in a cutt...
متن کاملEffect of Repeated Sterilization Cycles on the Physical Properties of Scaling Instruments: A Scanning Electron Microscopy Study
BACKGROUND Repeated sterilizations cycles cause undesirable alterations in the material properties of the instruments, such as corrosion, alterations in the hardness of the metal and the loss of the cutting sharpness of the instrument. This research examined the effect of repeated dry heat sterilization and autoclaves cycles on carbon steel (CS) and stainless steel (SS) curettes during the scal...
متن کاملEffect of Sterilization by Dry Heat or Autoclaving on Bacterial Penetration through Berea Sandstone.
A study was undertaken to determine why bacteria could penetrate lengths of consolidated sandstone (Berea) faster when the sandstone was sterilized by autoclaving than when dry heat (150 degrees C, 3 h) was used. Changes in permeability, porosity, and pore entrance size of the rock as a result of autoclaving were not sufficient to explain the differences in penetration times observed, but elect...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of clinical pathology
دوره 14 شماره
صفحات -
تاریخ انتشار 1961