Measurement and Calibration of a High-Sensitivity Microwave Power Sensor with an Attenuator
نویسندگان
چکیده
In this paper, measurement and calibration of a high-sensitivity microwave power sensor through an attenuator is performed using direct comparison transfer technique. To provide reliable results, a mathematical model previously derived using signal flow graphs together with non-touching loop rule analysis for the measurement estimate (i.e., calibration factor) and its uncertainty evaluation is comparatively investigated. The investigation is carried out through the analysis of physical measurement processes, and consistent mathematical model is observed. Later, an example of Type-N (up to 18 GHz) application is used to demonstrate its calibration and measurement capability.
منابع مشابه
THE GLOBAL SOURCE FOR PROVEN TEST AND MEASUREMENT TECHNOLOGY 100 mW Feedthrough Power Standard
Commercially available power meters and sensors have measurement ranges up to several watts. Accurate measurements with these devices require periodic calibration with traceable standards. Conventional calibrations typically take place in the 1mW to 10mW range. This range can be extended downwards for highly sensitive diode sensors by means of a calibrated attenuator. Raising the calibration le...
متن کاملBroadband Microwave Interferometry for Nondestructive Evaluation
A broadband microwave interferometric technique for scanning near-field microscopy applications is proposed. The method is based on the association of a vector network analyzer, a hybrid coupler, an evanescent microwave coaxial probe and a precise impedance tuner built up with a high precision programmable delay line and a variable motor-driven attenuator. Advantages such as simplicity of opera...
متن کاملRF and Microwave Power Sensor Calibration by Direct Comparison Transfer
Many instruments can be used to measure radio frequency (RF) and microwave power. The most accurate one is a power sensor with a meter. The accuracy of RF and microwave power measurement depends on the accuracy of power sensor calibration. This chapter provides calibration methods of RF and microwave power sensor with system setup, modeling, equations, and analyses in different representations,...
متن کاملMeasuring Output VSWR For An Active Levelled Source
Mismatch error is one of the major contributions to measurement uncertainty in RF & Microwave calibration. When a signal source is used in calibration applications, knowledge of the output impedance (or source VSWR) is necessary to enable users to estimate the mismatch uncertainty contribution when performing their measurement uncertainty calculations. However, measuring the output match of an ...
متن کاملInitial Plan for a Precision Temperature Sensor
Precision microwave radiometry requires accurate internal calibration sources. A microwave terminator is one such internal source, and, under the assumption of a high quality match, produces a noise power directly proportional to the physical temperature of the terminator. Precise measurement of this temperature is required in order to provide a quality calibration standard. It is desirable for...
متن کامل