Peg-in-Hole assembly using Impedance Control with a 6 DOF Robot
نویسنده
چکیده
To gain insight in problems of industrial assembly operations, an anthropomorphic robot equipped with a vision system was used to insert differently shaped pegs into corresponding holes of a plastic ball. Spatial impedance control was used, to properly deal with the interaction between robot and environment and to elegantly chose the impedance of the robot. Simulations gave insight into the behavior of the manipulator during free motion and during contact. Experimental results complied with simulations, but contact forces appeared to be higher than the simulated ones.
منابع مشابه
Peg-in-Hole Assembly Based on Two-phase Scheme and F/T Sensor for Dual-arm Robot
This paper focuses on peg-in-hole assembly based on a two-phase scheme and force/torque sensor (F/T sensor) for a compliant dual-arm robot, the Baxter robot. The coordinated operations of human beings in assembly applications are applied to the behaviors of the robot. A two-phase assembly scheme is proposed to overcome the inaccurate positioning of the compliant dual-arm robot. The position and...
متن کاملVariable Impedance Control for Rehabilitation Robot using Interval Type-2 Fuzzy Logic
In this study, a novel variable impedance control for a lower-limb rehabilitation robotic system using voltage control strategy is presented. The majority of existing control approaches are based on control torque strategy, which require the knowledge of robot dynamics as well as dynamic of patients. This requires the controller to overcome complex problems such as uncertainties and nonlinearit...
متن کاملModelling and Control of Peg-in-hole Assembly Performed by a Translational Robot
The peg-in-hole insertion is a problem that has been extensively examined in the scientific literature. It represents a generic assembly process of two parts mated by peg-hole couplings. The PMAR Lab group is building the prototype of an innovative high-speed parallel robot for force-controlled applications. Its three-degree-offreedom architecture is characterised by purely translational motion...
متن کاملAdaptive Control and Impedance Control for Dual Robotic Arms Manipulating a Common Heavy Load
Impedance control provides a convenient framework for designing control algorithms for robotic applications that involve interaction with the environment. Passive impedance control was utilized in the early days of robotic applications, when the peg-in-hole type of tasks were performed using remote center compliance. Active impedance control using digital measurements of contact forces for debu...
متن کاملANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کامل