Photo-induced ignition phenomenon of carbon nanotubes by Xenon pulsed light: Ignition tests analysis, automotive and new potential applications, future developments

نویسندگان

  • Patrizio Primiceri
  • Roberto de Fazio
  • Luciano Strafella
  • Antonio Paolo Carlucci
  • Paolo Visconti
چکیده

The possibility to use carbon nanotubes (CNTs) enriched with a certain amount of metal nanoparticles for photo-inducing the combustion of liquid fuel sprays, gaseous and solid fuels was investigated in different research works. CNTs photo-ignition phenomenon has been used to trigger the combustion of different fuel typologies, demonstrating better features compared with those obtained by employing a traditional spark-plug. These improvements are due to the presence of distributed ignition nuclei inside the combustion chamber, so obtaining better values of the peak pressure, ignition delay and combustion duration. In this work, the CNTs photo-ignition phenomenon has been analyzed in order to find the minimum energy values needed to trigger the ignition, by varying the light pulse parameters and the nanoparticles concentration, Multi Wall CNTs (MWCNTs) – ferrocene, by weight. Afterwards, the results of combustion processes, triggered by using the nanoparticles, are shown comparing them with those obtained by means the spark plug and with results already published related to other fuel typologies. Hence, an overview of the possible applications of this photo-ignition phenomenon, beside that of the automotive field, is presented, also considering the disadvantages of the Xe-lamp based triggering system. Therefore, after a critical discussion on the light source typology until now used (Xenon lamp), by reporting the possible contraindications deriving from the use of this light source in most of the applicative fields, a solution is here proposed. It involves the substitution of the Xe lamp with LED sources, showing also the related experimental setup. This solution is also strengthened by the our experimental observations of CNTs photo-ignition by using high-power white LEDs as light source, never reported up to now in the literature, and by better characteristics of adaptability, robustness, easy driving and benefits provided by the LEDs rather than the Xenon lamp. © 2017 Universidad Nacional Autónoma de México, Centro de Ciencias Aplicadas y Desarrollo Tecnológico. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Photo-ignition process of multiwall carbon nanotubes and ferrocene by continuous wave Xe lamp illumination

This work aims to investigate and characterize the photo-ignition phenomenon of MWCNT/ferrocene mixtures by using a continuous wave (CW) xenon (Xe) light source, in order to find the power ignition threshold by employing a different type of light source as was used in previous research (i.e., pulsed Xe lamp). The experimental photo-ignition tests were carried out by varying the weight ratio of ...

متن کامل

Improved Photo-Ignition of Carbon Nanotubes/Ferrocene Using a Lipophilic Porphyrin under White Power LED Irradiation

The aim of this work is to investigate and characterize the photo-ignition process of dry multi-walled carbon nanotubes (MWCNTs) mixed with ferrocene (FeCp₂) powder, using an LED (light-emitting diode) as the light source, a combination that has never been used, to the best of our knowledge. The ignition process was improved by adding a lipophilic porphyrin (H₂Pp) in powder to the MWCNTs/FeCp₂ ...

متن کامل

Distributed Ignition Using Single-Walled Carbon Nanotubes (SWCNTs) with Applications in Aerospace and Future Automotive Engines

Ignition characteristics of SWCNTs with an ordinary camera flash are reported here. The ultimate goal of the work is to use SWCNT or other nanostructured materials as a means for distributed ignition in liquid rocket fuel sprays and homogeneous-charged compression ignition (HCCI) engines. The idea was originally proposed by the author in April 2003 and patented after initial investigation. Base...

متن کامل

Abstract Submitted for the GEC08 Meeting of The American Physical Society Sorting Category: 2.6 (E) Arguments for increased efficiency of Xe excimer DBDs by pulsed instead of sinusoidal excitation MARK PAR- AVIA,

Submitted for the GEC08 Meeting of The American Physical Society Sorting Category: 2.6 (E) Arguments for increased efficiency of Xe excimer DBDs by pulsed instead of sinusoidal excitation MARK PARAVIA, KLAUS E. TRAMPERT, MICHAEL MEISSER, WOLFGANG HEERING, Light Technology Institute, University Karlsruhe — Xenon excimer dielectric barrier discharges are used as VUV sources or as plane light sour...

متن کامل

Photo-ignition of Carbon Nanotube for Ignition of Liquid Fuel Spray and Solid Fuel

We have studied the ignition of liquid fuel and certain solid fuels by the photoignition of single wall carbon nanotubes (SWCNTs). Our investigation includes the effect of solid additives such as aluminum nano-particles and solid oxidizers such as ammonium perchlorate (AP) on the photoignition characteristics. We have shown that by mixing CNT with other nanoparticles and powdered material, the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017