Corrosion Factors and Corrosion Cells
ثبت نشده
چکیده
منابع مشابه
Preparation of SiO2/ZrO2 ceramic nanocomposite coating on Aluminum alloys as metallic part of the photovoltaic cells and study its corrosion behavior.
Nowadays due to water shortage, the use of air humidity as the sustainable solution has been considered by cities located in coastal zones; especially in warm and humid climate. However, the use of air humidity also has its own problems such as corrosion of metal parts in photovoltaic cells that used for energy supplying and they are often made of Aluminum alloy. Therefore different methods suc...
متن کاملInvestigating of Factors Affecting the Corrosion Protection of Epoxy Primer containing Calcium Hydrogen Orthophosphate and Nano Silica Using Taguchi Method
The current essay analyzes the anti-corrosion properties of epoxy primers including anti-corrosion pigment calcium hydrogen orthophosphate and hydrophobic nano silica with various percentages optimized by Taguchi experimental design. The impact of influential factors such as the percentage of anti-corrosion pigments, percentage of nano silica and pigment to binder ratio on anti-corrosion proper...
متن کاملA Review of Magnesium/Magnesium Alloys Corrosion and its Protection
A review is provided about the current research on magnesium/magnesium alloys corrosion in the industry. Except for reviewing the kinds of corrosion on galvanic corrosion, stress corrosion, and corrosion fatigue, its corresponding mechanisms are also explained, such as the influence of metallurgical factors, and environmental factors. Furthermore, the protection of magnesium/magnesium alloys co...
متن کاملReliable corrosion inhibition in the oil and gas industry
The objective of the work was to undertake a literature review on the subject of corrosion inhibition in the offshore oil and gas industry to understand the current issues. The application of chemical corrosion inhibitors can significantly reduce the rate of corrosion of carbon steel pipelines due to the presence of CO2 and/or H2S. An inhibited corrosion rate of 0.1 mm/year can typically be ach...
متن کاملAccelerated Degradation Test and Predictive Failure Analysis of B10 Copper-Nickel Alloy under Marine Environmental Conditions
This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu₂O film increased gradually. Its corrosion product was Cu₂(O...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010