Spatial involute gearing - a new type of skew gears
نویسنده
چکیده
This is a geometric approach to spatial involute gearing which has recently been developed by Jack Phillips [4]. Due to Phillips' fundamental theorems helical involute gears for parallel axes (Fig. 2) serve also as tooth flanks for a uniform transmission between skew axes, and the transmission ratio is even independent of the relative position of the axes.
منابع مشابه
The Computational Fundamentals of Spatial Cycloidal Gearing
The tooth flanks of bevel gears with involute teeth are still cut using approximations such as Tredgold’s and octoid curves, while the geometry of the exact spherical involute is well known. The modeling of the tooth flanks of gears with skew axes, however, still represents a challenge to geometers. Hence, there is a need to develop algorithms for the geometric modeling of these gears. As a mat...
متن کاملA Study on Spatial Cycloid Gearing
Understanding the geometry of gears with skew axes is a complex task, hard to grasp and to visualize. However, due to Study’s Principle of Transference, the geometric treatment based on dual vectors can be readily derived from that of the spherical case. This paper is based on Martin Disteli’s work and on the authors’ previous results where Camus’ concept of an auxiliary curve is extended to th...
متن کاملOn Jack Phillip's Spatial Involute Gearing
This is a geometric approach to spatial involute gearing which has recently been developed by Jack Phillips (2003). After recalling Phillips' fundamental theorems and other properties, some geometric questions around this interesting type of gearing are discussed.
متن کاملGeometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears
A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملOn Martin Disteli’s Main Achievements in Spatial Gearing: Disteli’s Diagram
Martin Disteli transferred Releaux’s principle of gearing for the particular case of cycloid gears from the sphere into three-dimensional space — cf. Disteli (1904) and Disteli (1911). This transfer led to the analysis of a pair of meshing skew gears whose tooth flanks are ruled surfaces, in contact along lines. Disteli (1911) produced a simple diagram illustrating the relation between the angu...
متن کامل