Nano-second UV laser processed micro-grooves on Ti6Al4V for biomedical applications
نویسندگان
چکیده
Article history: Laser surface texturing can Received 19 October 2007 Received in revised form 29 April 2008 Accepted 5 May 2008 Available online 16 May 2008
منابع مشابه
Characterization of Nd: Yag Laser Radiation Effects on Ti6Al4V Physico-Chemical Properties: An In Vivo Study
The effect of a Nd: YAG laser (1064 nm) has been studied on Ti6Al4V alloy in terms of optical and physical parameters for biomedical applications. The superior surface microhardness hardness (i.e. 377 VHN) is attributed to grain refinement associated with laser melting and rapid solidification. The electrochemical property, mainly pitting corrosion resistance, has been carried out in Hanks salt...
متن کاملExtraction and manipulation of biological specimen combining UV-laser-ablation and atomic-force microscopy
Modern applications in biological research require high-resolution methods allowing the manipulation of biological samples with a precision beyond the resolution limit of light microscopy. For this purpose the atomicforce microscope (AFM) is an appropriate tool. Promising laser-surgery methods for biomedical applications have been developed employing infrared or near-infrared lasers. However, s...
متن کاملLoading Drug on Nanostructured Ti6Al4V-HA for Implant Applications
Arrayed Ti6Al4V nanotubes (TNT) coated with hydroxyapatite (HA) were synthesized via electrochemical anodization method. Paracetamol was loaded onto TNT-HA electrode. Effects of anodization, nanotube formation and hydroxyapatite deposition on sorption and release of the drug were investigated. Saturation time of paracetamol on the anodized samples was 30% shorter than the hydroxyapatite-coated ...
متن کاملNumerical Study on Low Reynolds Mixing ofT-Shaped Micro-Mixers with Obstacles
Micromixers are one of the most crucial components of Lab-On-a-Chip devices with the intention of mixing and dispersion of reagents like small molecules and particles. The challenge facing micromixers is typically insufficient mixing efficiency in basic designs, which results in longer microchannels. Therefore, it is desirable to increase mixing efficiency, in order to decrease mixing length, w...
متن کاملFabrication of Porous Segments Using Ti-6Al-4V Chips for Orthopaedic Applications
Different methods have been evaluated for manufacturing the porous Ti6Al4V alloys according to decreasing stress shielding phenomenon and increasing mechanical compatibility between the metallic components and the host tissue. For this purpose, in this work Ti6Al4V alloy chips were pressed under 400 MPa pressure and then samples were categorized and heated into two groups at 1000 and 1150℃ unde...
متن کامل