CFD analysis of transpirational cooling by vegetation: Case study for specific meteorological conditions during a heat wave in Arnhem, Netherlands

نویسندگان

  • Christof Gromke
  • Bert Blocken
  • Wendy Janssen
  • Bart Merema
  • Twan van Hooff
  • Harry Timmermans
چکیده

The transpirational cooling of vegetation as a measure to mitigate outdoor air temperatures was investigated for a street canyon in the city center of Arnhem, the Netherlands for the meteorological conditions of an afternoon hour on a hot summer day during a heat wave with wind of speed 5.1 m s 1 at 10 m above ground and direction along the canyon. Computational Fluid Dynamics (CFD) simulations with locally applied vegetation in the street, i.e. avenue-trees, facade greening, roof greening and all three combined, were performed. The 3D steady-state Reynolds-averaged NaviereStokes (RANS) equations were closed by the realizable k-ε turbulence model extended with source and sink terms to represent the effects of vegetation on air flow. By specifying a cooling power term in the energy equation, the transpirational cooling by vegetation was accounted for. The strongest cooling by a single vegetative measure was obtained with the avenue-trees with mean and maximum temperature reductions at pedestrian level of 0.43 C and 1.6 C, respectively. Facade greening resulted in rather small changes with mean and maximum reductions of 0.04 C and 0.3 C, respectively. For roof greening no noticeable reductions inside the canyonwere found. In the case of a combination of all vegetative measures, cooling in terms of spatial distribution and intensity overall resembled a linear superposition of those of the vegetative measures solely applied with 0.52 C mean and 2.0 C maximum temperature reduction. Overall, the cooling was restricted to the vicinity of the vegetative measures, i.e. up to a distance of a few

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental and Numerical Investigations on Al2O3–Tricosane Based Heat Pipe Thermal Energy Storage

The enhancement of operating life cycle of electronic devices necessitates the development of efficient cooling techniques. Therefore, in the present work the effects of employment of Phase Change Material, in the adiabatic section of heat pipe for electronic cooling applications were experimentally and numerically investigated. Tricosane (100 ml) is chosen as PCM in this study, where Al2O3 nan...

متن کامل

Investigation of Radiative Cooling Using a Photonic Composite Material for Water Harvesting

The objective of this study is to design and analyse materials which are capable of harvesting water from thin air using condensation phenomenon which employs the radiative cooling approach. These passive cooling materials not only solve the water generating problems, but also employed in various cooling applications. The fundamental concept of radiative cooling is analysed and the performance ...

متن کامل

Use of Becker and neurotic pressure bioclimatic indices in the Assessment of Thermal Comfort in Outdoor Environments based on Meteorological Data: Case Study in Three Different Climates of Iran

Background and aims: lack of thermal comfort in outdoor environments, can cause disorders and diseases, negative impact on productivity and performance, and even can cause death. Therefore, it is important to evaluate it. Various indices and models have been used to assess the level of comfort of humans. In most evaluations has been tried to estimate the comfort level using meteorological data ...

متن کامل

Cooling Performance Analysis of Water-Cooled Heat Sinks with Circular and Rectangular Minichannels Using Finite Volume Method

In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...

متن کامل

How to Design a Cryogenic Joule-Thomson Cooling System: Case Study of Small Hydrogen Liquefier

Heat exchangers are the critical components of refrigeration and liquefaction processes. Selection of appropriate operational conditions for cryogenic recuperative heat exchanger and expansion valve operating in Joule-Thomson cooling system results in improving the performance and efficiency. In the current study, a straightforward procedure is introduced to design an efficient Joule-Thomson co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016