Detachment of tobacco-smoke-material carriers from surfaces by turbulent air flow.

The influence of tobacco-smoke-material (TSM) on the detachment of microparticles from surfaces by turbulent air flow was investigated experimentally. Both clean and dusty glass surfaces were subjected to TSM either before or after the deposition of 64 microm to 76 microm-diameter stainless steel microparticles onto the surfaces. The TSM was generated by mechanically puffing research-grade cigarettes inside a smoking box that contained the surfaces. Microparticle detachment characteristics were studied in a wind tunnel using video microphotography. Measured nicotine concentration was used to determine the amount of TSM deposited on a surface.The 5% and 50% threshold velocities for detachment were used to quantify the effect of TSM on microparticle detachment. These velocities were compared with those obtained using a clean surface with no TSM exposure. The effect of TSM exposure on microparticle detachment depended significantly on whether exposure occurred before or after microparticle deposition. TSM exposure before microparticle deposition had little effect. TSM exposure after deposition delayed detachment to much higher velocities. The presence of dust on the surface with TSM also delayed detachment and increased the variability in the detachment velocities as compared to the case of a clean surface with no TSM exposure.