Surface plasmon sensor with gold film deposited on a two-dimensional colloidal crystal
ثبت نشده
چکیده
A sensor based on surface plasmon resonance (SPR) of plasmonic crystals fabricated via a colloidal-crystalassisted templating method is studied. Plasmonic crystals are prepared by depositing a thin gold (Au) layer onto a twodimensional array of polystyrene spheres self-assembled on a quartz substrate. The enhanced transmission as a result of the SPR of Au plasmonic crystals, which are immersed in different ambient liquids, are measured and compared with that of polystyrene (PS) microsphere templates of different sizes, both before and after removal of Au nanoprisms formed on the quartz substrate through pores among the spheres. It is found that the measured sensitivities exhibit a linear dependence on the refractive index of the surrounding medium and are linked to coupling effects between SPRs on the corrugated Au film and nanoislands. The feasibility of the SPR system in molecular monolayer detection is further demonstrated through a formation of alkanethiolate self-assembled monolayers on the Au film surface, which causes a 4 nm red-shift of the main SPR. PACS 07.07.Df; 73.20.Mf; 78.66.-w; 81.16.Dn
منابع مشابه
Hydrogen sensing by localized surface plasmon resonance in colloidal solutions of Au-WO3-Pd
Nowadays, hydrogen has attracted significant attention as a next generation clean energy source. Hydrogen is highly flammable, so detection of hydrogen gas is required. Gold nanoparticle based localized surface plasmon resonance (LSPR) is an advanced and powerful sensing technique, which is well known for its high sensitivity to surrounding refractive index change in the local environment. We p...
متن کاملTheoretical analysis of gold-deposited optical fiber sensor and characterization of the gold film.
Gold-deposited optical fiber sensors with film thicknesses from 30 to 60 nm were prepared, and the responses to a wide range of a refractivity (1.33-1.54 refractive index (RI) units) were investigated both experimentally and theoretically. The response curve of the sensor has two minima in the refractivity range from 1.33 to 1.44 and at 1.462 RI units. The former minimum is due to surface plasm...
متن کاملAdjustable Plasmonic Bandgap in One-Dimensional Nanograting Based on Localized and Propagating Surface Plasmons
Compared to the long history of plasmonic gratings, there are only a few studies regarding the bandgap in the propagation of plasmonic surface waves. Considering the previous studies on interpretation of plasmonic bandgap formation, we discuss this phenomenon using the effect of both surface plasmon polariton (SPP) and localized surface plasmon (LSP) for our fabricated one-dimensional metallic-...
متن کاملBehenic Acid Monolayer and Bilayer Assemblies- A Study of Concanavalin A (Con A) Adsorption and its Interaction with Dextran Using Surface Plasmon Resonance Spectroscopy and Microscopy
Deposition of behenic acid (B.A) mono and bilayers onto gold coated surfaces was performed by Langmuir-Blodget dip-casting technique. Surface Plasmon resonance (SPR) and ellipsometry methods were employed for investigation of the monolayer and bilayer films. The adsorption of the biologically important molecule Concanavalin A (Con A) from bulk solution to these monolayers and bilayers as we...
متن کاملOptimization of Sensitivity and Stability of Gold/Silver bi-Layer Thin Films Used in Surface Plasmon Resonance Chips
The aim of this study is experimental assay of sensitivity and stability of a bimetallic silver/gold SPR sensor chip. This chip utilizes the sensitivity of the silver and the stability of the gold. Moreover, the Silver layer (instead of usual Cr or Ti layer) was used as an adhesive intermediate layer between the Gold layer and the glass substrate. The optimization of the Gold/Silver thickness u...
متن کامل