Novel 16-Bit and 32-Bit Group High Speed BCD Adders
نویسندگان
چکیده
The VLSI binary adder is the basic building block in any computation unit. It is widely used in the arithmetic logic unit, memory addressing computation and in many other places. In this paper the binary adder is presented with keeping in mind speed, power and finally area. In this paper the BCD adder is designed using the mixed approach such as hierarchical, muxing and variable grouping techniques. The design and result are presented in this paper. Refer ences
منابع مشابه
Design and Synthesis of Reduced Delay BCD
Arithmetic and memory address computation are performed using adder operations. Hence, design of adders form an important subset of electronic chip design functionality. Performance of BCD adders is to be considered with gate count, area, delay, power consumption. A new BCD adder design is attempted here to reduce the delay and thereby increasing the speed of response. BCD adder design is consi...
متن کاملSymmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE)
Carbon nanotube field-effect transistors (CNFETs) are a promising candidate to replace conventional metal oxide field-effect transistors (MOSFETs) in the time to come. They have considerable characteristics such as low power consumption and high switching speed. Full adder cell is the main part of the most digital systems as it is building block of subtracter, multiplier, compressor, and other ...
متن کاملReduced Area Low Power High Throughput BCD Adders for IEEE 754r Format
IEEE 754r is the ongoing revision to the IEEE 754 floating point standard and a major enhancement to the standard is the addition of decimal format. Firstly, this paper proposes novel two transistor AND and OR gates. The proposed AND gate has no power supply, thus it can be referred as the Powerless AND gate. Similarly, the proposed two transistor OR gate has no ground and can be referred as Gr...
متن کاملDESIGN of HIGH SPEED, LOW AREA, CARRY FLOW BCD ADDER in QCA
We can overcome the CMOS scaling problems with emerging Nanotechnology. In Nanotechnology the basic building block of digital design is QCA. The problem in design of decimal adders on Quantum dot cellular automata with reduction of QCA primitives is very limited. In this paper we present a BCD adder with less number of QCA primitives and it is compared with existing BCD adder designs. Our propo...
متن کاملModified 32-Bit Shift-Add Multiplier Design for Low Power Application
Multiplication is a basic operation in any signal processing application. Multiplication is the most important one among the four arithmetic operations like addition, subtraction, and division. Multipliers are usually hardware intensive, and the main parameters of concern are high speed, low cost, and less VLSI area. The propagation time and power consumption in the multiplier are always high. ...
متن کامل