Electrochemical impedance analysis of SILAR deposited Cu2SnS3 (CTS) thin film
نویسندگان
چکیده
SILAR deposited copper tin sulfide (Cu2SnS3) thin films were used to analyze the study of electrochemical impedance, capacitancevoltage characteristics and currentvoltage characteristics. The photoconversion efficiency of SILAR deposited CTS thin film-based photoelectrochemical cell elucidate with the help of capacitance-Voltage (C-V) Characteristics study by MottSchottky plot and corresponding circuit model of the impedance spectra of the photoelectrochemical cell.
منابع مشابه
An Investigation of SILAR Grown CdO Thin Films
Cadmium oxide (CdO) thin films were deposited on the glass substrate by the modified SILAR method, using cadmium acetate dihydrate and ammonium hydroxide aqueous solution as precursors. The structural, surface morphological, elemental composition and optical properties of the deposited films were investigated via X-Ray Diffraction (XRD), scanning electron microscopy, EDAX,...
متن کاملStructural and Optical Properties of Zno Nanostructure Thin Film Syn- thesized By SILAR Method
Zinc Oxide (ZnO) thin film have been deposited using Successive Ionic Layer Adsorption and Reaction (SILAR) technique, which is based on alternate dipping of substrate in the solution and deionized water. The thin film was grown on glass substrate. The precursor for ZnO film was diluted aqueous solution of ZnSo4 complex with NH3. The film was investigated by X-ray diffraction, Scanning electron...
متن کاملStructural and Morphological Characterization of ZnO thin Films Synthesized by SILAR
Zinc oxide (ZnO) thin films were deposited on glass substrates from ammonium zincate complex as cationic precursor following SILAR (Successive ion layer adsorption and reaction) technique. Characterization techniques of XRD, HRSEM, TEM, EDX and FTIR were utilized for detailed microstructural studies of the coated films. A comparison of physical properties of the films was made from those deposi...
متن کاملIi. Solid State Thin Film Lithium Batteries
Solid state thin film lithium microbatteries fabricated by pulsed-laser deposition (PLD) are suggested. During deposition the following process parameters must be considered, which are laser energy and fluence, laser pulse duration, laser pulse frequency, target composition, background gasses, substrate temperature, target-substrate distance and orientation. The effects of the variations of the...
متن کاملELECTROCHEMICAL BEHAVIOR OF GC, Pt AND Au ELECTRODES MODIFIED WITH THIN FILM OF COBALT HEXACYANOFERRATE
0A thin film of cobalt hexacyanoferrate (CoHCF), an analogue of mixed-valence Prussian blue, was deposited electrochemically on the glassy carbon, platinum and gold electrode surfaces in 0.5M KC1 solution. The electrochemical behavior of these modified electrodes show three couples of redox peaks by CV in a supporting electrolyte solution of 0.5M NaCl, whereas for Au modified electrode only ...
متن کامل