Boron modified molybdenum silicide and products
نویسندگان
چکیده
A boron-modified molybdenum silicide material having the composition comprising about 80 to about 90 weight % Mo, about 10 to about 20 weight % Si, and about 0.1 to about 2 weight % B and a multiphase microstructure including Mo.sub.5 Si.sub.3 phase as at least one microstructural component effective to impart good high temperature creep resistance. The boron-modified molybdenum silicide material is fabricated into such products as electrical components, such as resistors and interconnects, that exhibit oxidation resistance to withstand high temperatures in service in air as a result of electrical power dissipation, electrical resistance heating elements that can withstand high temperatures in service in air and other oxygenbearing atmospheres and can span greater distances than MoSi.sub.2 heating elements due to improved creep resistance, and high temperature structural members and other fabricated components that can withstand high temperatures in service in air or other oxygen-bearing atmospheres while retaining creep resistance associated with Mo.sub.5 Si.sub.3 for structural integrity.
منابع مشابه
Carbon or boron modified titanium silicide
A titanium silicide material based on Ti.sub.5 Si.sub.3 intermetallic compound exhibits substantially improved oxidative stability at elevated temperatures. In particular, carbon is added to a Ti.sub.5 Si.sub.3 base material in an amount (e.g. about 0.3 to about 3.6 weight % C) effective to impart substantially improved oxidative stability at elevated temperatures, such as about 1000 Si.sub.3 b...
متن کاملImproved Reflectance and Stability of Mo / Si Mu It i layers
Commercial EUV lithographic systems require multilayers with higher reflectance and better stability then that published to date. Interface-engineered MoISi multilayers with 70% reflectance at 13.5 nm wavelength (peak width of 0.545 nm) and 71% at 12.7 nm wavelength (peak width of 0.49 nm) were developed. These results were achieved with 50 bilayers. These new multilayers consist of Mo and Si l...
متن کاملFracture and Fatigue-Crack Growth Behavior in Mo-12Si-8.5B Intermetallics at Ambient and Elevated Temperatures
perhaps the most progress has been made with alloys based on nickel and especially titanium aluminides. These alloys can Boron-containing molybdenum silicides have received some exhibit significant room temperature ductility, at least compared interest of late due to their superior low-temperature "pest" to other intermetallics, but have the major disadvantage that their resistance and comparab...
متن کاملStability of boron and phosphorus implanted tungsten silicide structures at high temperatures
We report on the stability of sputter-deposited tungsten silicide (WSi2.6) films that were implanted with boron or phosphorus and annealed at high temperatures using rapid thermal annealing. Depending on process conditions, some films were found to be unstable, resulting in peeling and lifting from the substrate. The regime of stability was experimentally determined and found to be a function o...
متن کاملBimolecular porous supramolecular networks deposited from solution on layered materials: graphite, boron nitride and molybdenum disulphide.
A two-dimensional porous network formed from perylene tetracarboxylic diimide (PTCDI) and melamine may be deposited from solution on the surfaces of highly oriented pyrolytic graphite (HOPG), hexagonal boron nitride (hBN) and molybdenum disulphide (MoS2). Images acquired using high resolution atomic force microscopy (AFM) operating under ambient conditions have revealed that the network forms e...
متن کامل