A Wideband, Low-Noise Superconducting Amplifier with High Dynamic Range

Amplifiers are ubiquitous in electronics and play a fundamental role in a wide range of scientific measurements. From a user’s perspective, an ideal amplifier has very low noise, operates over a broad frequency range, and has a high dynamic range it is capable of handling strong signals with little distortion. Unfortunately, it is difficult to obtain all of these characteristics simultaneously. For example, modern transistor amplifiers offer multi-octave bandwidths and excellent dynamic range. However, their noise remains far above the fundamental limit set by the uncertainty principle of quantum mechanics.[1] Parametric amplifiers, which predate transistor amplifiers and are widely used in optics, exploit a nonlinear response to transfer power from a strong pump tone to a weak signal. If the nonlinearity is purely reactive, i.e. nondissipative, in theory the amplifier noise can reach the quantum-mechanical limit.[2] Indeed, microwave frequency superconducting Josephson parametric amplifiers[3, 4] do approach the quantum limit, but generally are narrow band and have very limited dynamic range. In this paper, we describe a superconducting parametric amplifier that overcomes these limitations. The amplifier is very simple, consisting only of a patterned metal film on a dielectric substrate, and relies on the nonlinear kinetic inductance of a superconducting transmission line. We measure gain extending over 2 GHz on either side of an 11.56 GHz pump tone, and we place an upper limit