A Hermetic Glass–Silicon Package Formed Using Localized Aluminum/Silicon–Glass Bonding
نویسندگان
چکیده
A hermetic package based on localized aluminum/silicon-to-glass bonding has been successfully demonstrated. Less than 0.2 MPa contact pressure with 46 mA current input for two parallel 3.5m-wide polysilicon on-chip microheaters can raise the temperature of the bonding region to 700 C bonding temperature and achieve a strong and reliable bond in 7.5 min. The formation of aluminum oxide with silicon precipitate composite layer is believed to be the source of the strong bond. Accelerated testing in an autoclave shows some packages survive more than 450 h under 3 atm, 100% RH and 128 C. Premature failure has been attributed to some unbonded regions on the failed samples. The bonding yield and reliability have been improved by increasing bonding time and applied pressure. [594]
منابع مشابه
High-Q Wafer Level Package Based on Modified Tri-Layer Anodic Bonding and High Performance Getter and Its Evaluation for Micro Resonant Pressure Sensor
In order to achieve and maintain a high quality factor (high-Q) for the micro resonant pressure sensor, this paper presents a new wafer level package by adopting cross-layer anodic bonding technique of the glass/silicon/silica (GSS) stackable structure and integrated Ti getter. A double-layer structure similar to a silicon-on-insulator (SOI) wafer is formed after the resonant layer and the pres...
متن کاملImplementation of silicon-on-glass MEMS devices with embedded through-wafer silicon vias using the glass reflow process for wafer-level packaging and 3D chip integration
This study presents a novel system architecture to implement silicon-on-glass (SOG) MEMS devices on Si–glass compound substrate with embedded silicon vias. Thus, the 3D integration of MEMS devices can be accomplished by means of through-wafer silicon vias. The silicon vias connecting to the pads of devices are embedded inside the Pyrex glass. Parasitic capacitance for both vias and microstructu...
متن کاملEvaluation of bonding between oxygen plasma treated polydimethyl siloxane and passivated silicon
Oxygen plasma treatment has been used extensively to bond polydimethyl siloxane to polydimethyl siloxane or glass in the rapid prototyping of microfluidic devices. This study aimed to improve the bonding quality of polydimethyl siloxane to passivated silicon using oxygen plasma treatment, and also to evaluate the bonding quality. Four types of passivated silicon were used: phosphosilicate glass...
متن کاملGlass Substrate with High Density Electrical Feedthroughs
This paper reports a novel method to produce high density feedthrough glass wafers with sufficient thickness for the packaging and interconnection of high density array micro electromechanical systems (MEMSs). Pyrex glass wafers with thin film metal lines on the surface are stacked and bonded with each other using phenyl methyl siloxane-based adhesive. The stacked glass wafer block is then slic...
متن کاملStudy on the Glass Silicon Anodic Direct Bonding Parameters
By MEMS packaging test platform for bonding process of bonding temperature and bonding time, and test silicon specifications experimental study. Experimental results indicate that when the bonding voltage of 1200V, bonding temperature of 445 0 C to 455 0 C, bonding time is 60s, the void fraction is less than 5%. Glass and silicon wafer bonding quality can achieve the best. The experimental resu...
متن کامل