Placement of SVC for Multi-objective Function using RCGA
نویسندگان
چکیده
This paper addresses the optimal placement of static var compensators (SVCs) in a power system network in such a manner that power loss, voltage deviation and installation cost is minimized. Voltage deviation is minimized by improving voltage profile. The aim of this study is to minimizing the power loss, voltage deviation and installation cost under critical contingency and increasing load condition in power system network. The multi-objective function is carried out in this study. RCGA is used to solve the optimization problem in this paper which is one of the heuristic methods. Real Coded Genetic Algorithm optimization helps in determining the location of the SVC. The proposed approach has been tested on IEEE-30 Bus test system with different objectives. It has also been observed, we can apply this algorithm to larger systems with computational difficulties. The obtained results show that the suggested method of SVC placement is effective in reducing the real power loss, voltage deviation and installation cost during normal as well as critical contingency cases.
منابع مشابه
Simultaneous RPD and SVC Placement in Power Systems for Voltage Stability Improvement Using a Fuzzy Weighted Seeker Optimization Algorithm
Voltage stability issues are growing challenges in many modern power systems. This paper proposes optimizing the size and location of Static VAR Compensator (SVC) devices using a Fuzzy Weighted Seeker Optimization Algorithm (FWSOA), as an effective solution to overcome such issues. Although the primary purpose of SVC is bus voltage regulation, it can also be useful for voltage stability enhance...
متن کاملOptimal Placement and Sizing of TCSC & SVC for Improvement Power System Operation using Crow Search Algorithm
Abstract: The need for more efficient power systems has prompted the use of a new technologies includes Flexible AC transmission system (FACTS) devices. FACTS devices provides new opportunity for controlling the line power flow and minimizing losses while maintaining the bus voltages within a permissible limit. In this thesis a new method is proposed for optimal placement and sizing of Thyristo...
متن کاملMulti-objective Based Optimization Using Tap Setting Transformer, DG and Capacitor Placement in Distribution Networks
In this article, a multi-objective function for placement of Distributed Generation (DG) and capacitors with thetap setting of Under Load Tap Changer (ULTC) Transformer is introduced. Most of the recent articles have paidless attention to DG, capacitor placement and ULTC effects in the distribution network simultaneously. Insimulations, a comparison between different modes was carried out with,...
متن کاملOptimal Placement of Static VAR Compensator to decrease Loadability Margin by a Novel Modified Particle Swarm Optimization Algorithm
In this paper, the Static Var Compensator (SVC) has been used to improve dynamic behaviour of power system. To do this, a new objective function is formulated considering power loss reduction, voltage profile improvement and loadability margin decrease. Other contribution of this research is proposing a novel structure for Particle Swarm Optimization (PSO) algorithm through modifying the initia...
متن کاملMulti Objective Allocation of Distributed Generations and Capacitor Banks in Simultaneous
This paper has developed a novel multiobjective function for optimal sizing and sitting ofDistributed Generation (DG) units and capacitor banks in simultaneous mode to improve reliabilityand reduce energy losses. The proposed function consists of four objectives: Cost of Energy NotSupplied (CENS), System Average Interruption Duration Index (SAIDI), costs of energy loss andinvestment. A novel st...
متن کامل