Acoustic pulse reflectometry for the measurement of musical wind instruments
نویسنده
چکیده
The bore profile and input impedance of a musical wind instrument provide valuable information about its acoustical properties. The time domain technique of acoustic pulse reflectometry can be used to measure the input impulse response of a tubular object, such as a wind instrument, from which both its bore profile and input impedance can be calculated. In this thesis, after a discussion of the theory of acoustic pulse reflectometry, the operation of a practical reflectometer is described and measurements of input impulse response, bore profile and input impedance are investigated. In general, the experimentally measured input impulse response of a tubular object contains a DC offset which must be removed for accurate bore reconstruction. A new, faster method of determining the DC offset is introduced which doesn’t require prior knowledge of the object’s dimensions. The bore profile of a test object, calculated by applying a lossy reconstruction algorithm to its input impulse response (after removal of the DC offset), is found to agree with directly measured radii to within 0.05mm. Various brass instrument reconstructions of similar accuracy are presented. An input impedance curve, calculated from the input impulse response of the test object, is found to have peak frequencies which agree with those of a theoretical curve to within 0.7% (a considerably better agreement than when a standard frequency domain measurement technique is used). Impedance curves of various brass instruments are presented. Bore reconstructions are used to confirm the presence, and in certain cases, the positions of leaks in instruments. For the special case of a leaking cylinder, the impedance curve is successfully used to calculate the size of the leak. Finally, a method is investigated which allows the practical reflectometer to measure longer objects than previously possible.
منابع مشابه
Evaluating the suitability of acoustical measurement techniques and psychophysical testing for studying the consistency of musical wind instrument manufacturing
Musicians often claim to be able to discern differences in the playing properties of musical wind instruments that have been manufactured in exactly the same way. These differences are most likely due to disparities in bore profile or in the positioning and sealing of any valves or side holes. In this paper, the suitability of acoustic pulse reflectometry and a capillary-based impedance measure...
متن کاملAcoustic pulse reflectometry in musical wind instrument research
Criteria for the design of an acoustic pulse reflectometer specifically intended for musical instrument research are discussed. Different types of pulse source are considered, and various approaches to the signal processing of the reflected pulse are evaluated., Finally, the practical utility of the technique for instrument designers and manufacturers is discussed.
متن کاملBore Reconstruction by Pulse Reflectometry and Its Potential for the Taxonomy of Brass Instruments
The character of a brass musical instrument is primarily dependent on its bore profile. Many historic brass instruments are so constructed that substantial parts of the air column are inaccessible to direct measurement. This paper discusses the factors involved and reports recent advances in the use of pulse reflectometry for bore reconstruction, in particular compensation for losses and allowa...
متن کاملMeasurement and Analysis of Acoustic Tubes Using Signal Processing Techniques
Physical modeling is a modern approach to musical acoustics and high-quality sound synthesis of musical instruments. In this paper, a time-domain method is used to measure acoustical properties of wind instruments. The instrument bore is modeled by an acoustical tube and a DSP-based measurement system is used to characterize transmission and reflection functions in the duct. Inverse filtering t...
متن کامل