Calorimetric analysis of coarse-grained polycrystalline aluminum by IRT and DIC

نویسندگان

  • Li Li
  • Jean-Michel Muracciole
  • Laurent Sabatier
  • Laurent Waltz
  • Bertrand Wattrisse
  • B. Wattrisse
چکیده

This study aims at performing grain scaled energy balance in mechanically-loaded aluminum polycrystal specimen. Two complementary imaging techniques were used in order to investigate the so-called material thermomechanical behavior: Digital Image Correlation and InfraRed Thermography to investigate respectively the kinematic and the thermal response of the material and, combining these two techniques, its calorimetric response.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of the Thermomechanical Behavior of Coarse-grained Polycrystalline Aluminum under Tensile Conditions

The aim of this paper is to present the advantages of using Digital Image Correlation (DIC) and Infrared Thermography (IRT) to investigate the thermomechanical behavior of aluminum at the scale of its microstructure. The study combines these complementary imaging techniques: Electron Backscatter Diffraction (EBSD) to characterise the microstructure of the sample, DIC to obtain strain fields and...

متن کامل

Local experimental investigations of the thermomechanical behavior of a coarse-grained aluminum multicrystal using combined DIC and IRT methods

This paper presents investigate the therm BackScattered Diffract with centimetric grai placement and strain fields stitutive modelling of crystal Image Correlation (DIC) and Infrared Thermography (IRT) methods to anical behavior of an aluminum at the microstructural scale. Electron SD) is used to characterize the microstructure of a 3 mm thick specimen ion (EB n size. This study combines the fo...

متن کامل

A Tri-modal 2024 Al -B4C composites with super-high strength and ductility: Effect of coarse-grained aluminum fraction on mechanical behavior

In this study, ultrafine grained 2024 Al alloy based B4C particles reinforced composite was produced by mechanical milling and hot extrusion. Mechanical milling was used to synthesize the nanostructured Al2024 in attrition mill under argon atmosphere up to 50h. A similar process was used to produce Al2024-5%wt. B4C composite powder. To produce trimodal composites, milled powders were combined w...

متن کامل

Dynamic observations of deformation in an ultrafine-grained Al–Mg alloy with bimodal grain structure

The tensile properties and deformation response of an ultrafine-grained (UFG) Al–Mg alloy with bimodal grain structure were investigated using a micro-straining unit and a strain mapping technique. Atomized Al 5083 powder was ball-milled in liquid N2 to obtain a nanocrystalline (NC) structure, then blended with 50 wt.% unmilled coarse-grained (CG) powder, and consolidated to produce a bimodal g...

متن کامل

An experimental study on hydraulic behavior of free-surface radial flow in coarse-grained porous media

The equations of fluids in porous media are very useful in designing the rockfill and diversion dams, gabions, breakwaters and ground water reserves. Researches have been showed that the Forchheimer equation is not sufficient for the analysis of hydraulic behavior of free-surface radial flows; because, in these flows, in addition to the hydraulic gradient and velocity, the variable of radius is...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017