Retrievals of Thick Cloud Optical Depth from the Geoscience Laser Altimeter System (GLAS) by Calibration of Solar Background Signal

نویسندگان

  • STEPHEN P. PALM
  • ANTHONY B. DAVIS
  • DOUGLAS A. SPANGENBERG
  • LOUIS NGUYEN
  • JAMES D. SPINHIRNE
  • PATRICK MINNIS
چکیده

Laser beams emitted from the Geoscience Laser Altimeter System (GLAS), as well as other spaceborne laser instruments, can only penetrate clouds to a limit of a few optical depths. As a result, only optical depths of thinner clouds ( about 3 for GLAS) are retrieved from the reflected lidar signal. This paper presents a comprehensive study of possible retrievals of optical depth of thick clouds using solar background light and treating GLAS as a solar radiometer. To do so one must first calibrate the reflected solar radiation received by the photon-counting detectors of the GLAS 532-nm channel, the primary channel for atmospheric products. Solar background radiation is regarded as a noise to be subtracted in the retrieval process of the lidar products. However, once calibrated, it becomes a signal that can be used in studying the properties of optically thick clouds. In this paper, three calibration methods are presented: (i) calibration with coincident airborne and GLAS observations, (ii) calibration with coincident Geostationary Operational Environmental Satellite (GOES) and GLAS observations of deep convective clouds, and (iii) calibration from first principles using optical depth of thin water clouds over ocean retrieved by GLAS active remote sensing. Results from the three methods agree well with each other. Cloud optical depth (COD) is retrieved from the calibrated solar background signal using a one-channel retrieval. Comparison with COD retrieved from GOES during GLAS overpasses shows that the average difference between the two retrievals is 24%. As an example, the COD values retrieved from GLAS solar background are illustrated for a marine stratocumulus cloud field that is too thick to be penetrated by the GLAS laser. Based on this study, optical depths for thick clouds will be provided as a supplementary product to the existing operational GLAS cloud products in future GLAS data releases.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cloud and aerosol measurements from GLAS: Overview and initial results

[1] Global space borne lidar profiling of atmospheric clouds and aerosol began in 2003 following the launch of the Geoscience Laser Altimeter System (GLAS) on the Ice, Cloud and land Elevation Satellite. GLAS obtains nadir profiles through the atmosphere in two wavelength channels, day and night, at a fundamental resolution of 76.8 m vertical and 172 m along track. The 532 nm channel uses photo...

متن کامل

Evaluation of Geoscience Laser Altimeter System (glas) Waveforms for Vegetated Landscapes Using Airborne Laser Altimeter Scanning Data

The Geoscience Laser Altimeter System aboard NASA’s Ice, Cloud and land Elevation Satellite will record the height distribution of laser energy reflected from surfaces within 70 m diameter footprints. For land surfaces, post-processing of this waveform data will be used to estimate the within-footprint mean elevation and surface relief due to ground slope and roughness, vegetation cover, buildi...

متن کامل

Passive and active detection of clouds: Comparisons between MODIS and GLAS observations

[1] The Geoscience Laser Altimeter System (GLAS), launched on board the Ice, Cloud and Land Elevation Satellite in January 2003 provides space-borne laser observations of atmospheric layers. GLAS provides opportunities to validate passive observations of the atmosphere for the first time from space with an active optical instrument. Data from the Moderate Resolution Imaging Spectroradiometers a...

متن کامل

Global Laser Pulse Reflectance at 1064 Nm of Snow and Land Surfaces from the Geosciences Laser Altimeter System Satellite Lidar

During the development of the Geoscience Laser Altimeter System (GLAS), launched in 2003, it was understood that the values of surface pusle reflectance was an important design parameter for satellite laser altimeters and that the magnitude of observed pulse reflectance would have valuable applications. Thus a significant effort was made to obtain calibrated surface pulse reflectance from GLAS ...

متن کامل

Laser pulse reflectance of the ocean surface from the GLAS satellite lidar

[1] The world’s oceans can potentially be used as an extended target for achieving a radiometric calibration of space borne lidar if the reflective properties of the surface can be accurately predicted from available environmental data such as wind speed. To test current understanding of ocean reflectance we compare surface pulse returns measured with the 1064 nm altimetry channel of the Geosci...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008