Effects of Cross Sectional Shape and Confining Material
ثبت نشده
چکیده
منابع مشابه
بررسی عددی تأثیر خصوصیات خاک بر باندهای برشی
In some natural events such as soil failure the deformations are localized in narrow restrictions, which are called shear bands. This event which is a fundamental phenomenon in granular material, has been widely investigated during recent decades within expensive experimental tests and also some numerical simulations. Most of previously used numerical methods are based on continuum theories des...
متن کاملResistance to Flow in a V-Shaped Bottom Channel
Water flow in open channels is always subject to the resistance to flow and energy dissipation. For design purposes, one of the needed variables is the hydraulic resistance coefficient. For this mean, the influence of cross-sectional shape together with secondary flow cells and lateral distribution of true boundary shear stress have not yet been fully explored. This paper surveys the number of ...
متن کاملCross Section Effects on Convergence-Confinement Method in Multi Stage Tunnel Excavation
Dimensionless coefficient () in convergence confinement method shows the relaxation of stress in the wall of the tunnel at different excavation movements. This factor is considered a constant number in previous studies and tunnel geometric characteristics (such as depth, cross-section shape, radius, soil material, etc.) are not included in its determination; however, ignoring these effects can...
متن کاملEffects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone)
The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...
متن کاملStress analysis of clasps made of glass fiber-reinforced composite material using three-dimensional finite element method: influence of shape in cross and longitudinal sections of circumferential clasp arms.
The purpose of this study was to investigate the effects of different cross-sectional shapes and presence of taper on stress distribution in clasp arms made of glass fiber-reinforced composite (FRC) material. Stress analysis of clasps was performed under a constant load (5 N) using a three-dimensional finite element method with due consideration to the anisotropy of unidirectional FRC material....
متن کامل