Ion exchange membranes as electrolyte to improve high temperature capacity retention of LiMn2O4 cathode lithium-ion batteries.
نویسندگان
چکیده
A LiMn(2)O(4) cathode lithium-ion battery using lithiated ion exchange membranes swollen with organic non-aqueous solvent as the electrolyte to overcome capacity fading at high temperature is first demonstrated, and shows very good capacity retention compared with conventional lithium-ion batteries using liquid electrolyte.
منابع مشابه
Voltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملElectrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کاملSelf-standing porous LiMn2O4 nanowall arrays as promising cathodes for advanced 3D microbatteries and flexible lithium-ion batteries
Three-dimensional self-supported cathode nanoarchitectures are the key to develop high-performance thin film lithium-ion microbatteries and flexible lithium-ion batteries. In this work, we have developed a facile “hydrothermal lithiation” strategy to prepare vertically aligned porous LiMn2O4 nanowall arrays, comprising highly crystallized spinel nanoparticles, on various conductive substrates w...
متن کاملBinder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries
Copper hexacyanoferrate (CuHCF) nanoparticles with tunnel-like Prussian blue structure were deposited on graphite substrate via pulse galvanostatic electrochemical deposition at 25 mA cm-2 with both on-time and off-time periods of 0.1 s, which presented the ability to intercalation/de-intercalation of Al ions reversibly in aqueous solution. The crystal structure of the as-prepared CuHCF f...
متن کاملCycling behaviour of barium doped LiMn2O4 cathode materials for Li ion secondary batteries
In order to improve the cycling performance of LiMn2O4, the spinel phase LiMn2–xBaxO4 (x = 0.01, 0.02 and 0.05) compounds were fabricated by the glycine-nitrate method. The structures of the products were investigated by X-ray diffraction. Electrochemical studies were carried out using the Li|LiMn2O4 and Li|LiMn2–xBaxO4 cells. The capacity loss of Li|LiMn2O4 cell is about 15% after 30 cycles, w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 48 79 شماره
صفحات -
تاریخ انتشار 2012