Three-dimensional viscoelastic simulation of woven composite substrates for multilayer circuit boards
نویسندگان
چکیده
Viscoelastic properties of woven composite substrates are essential to design dimensionally stable multilayer printed circuit boards. Unlike most existing numerical work which rely on simplified constitutive (elastic) and geometrical models, this study involves a fully three-dimensional viscoelastic model of a plain weave composite with accurate characterization of the woven geometry. Comparisons between numerical predictions and experimental data clearly indicate that the creep compliance of the composite depends not only on the relaxation of the matrix, but also on the time-dependent flexural deformations of the woven fabric bundles. Predictions of the inhomogeneous deformation fields over the repeating cell agree with experimental observations. # 2003 Published by Elsevier Ltd.
منابع مشابه
Local Time–Temperature-dependent Deformation of a Woven Composite by P. Shrotriya and N.R. Sottos
Moiré interferometry is utilized to investigate the time–temperature-dependent deformation of a woven composite substrate used in multilayer circuit board applications. Creep tests are performed at temperatures ranging from 27 to 70◦C, and the resulting longitudinal and transverse displacement fields are measured via moiré interferometry. Measured displacement fields reveal the influence of fab...
متن کاملViscoelastic response of woven composite substrates
Micromechanical models are developed to predict the time and temperature dependent response of woven composite substrates used in multilayer printed circuit boards. In the first part of this study, the elastic–viscoelastic correspondence principle is applied to previously reported elastic micromechanical models. The time-dependent creep compliance of a particular composite substrate (7628 style...
متن کاملEdgewise Compression Behavior of Three-Dimensional Integrated Woven Sandwich Composite Panels
متن کامل
Fabrication and characterization of a negative-refractive-index composite metamaterial
We have designed, produced, and experimentally characterized 2.7 mm thick composite panels having negative refractive index between 8.4 and 9.2 GHz. The composite metamaterial is fabricated using conventional commercial multilayer circuit-board lithography; three-dimensional physical (as opposed to electromagnetic) structure is introduced by the use of vias to form sections of the scattering el...
متن کاملFatigue Life Assessment of Composite Airplane Wing Subjected to Variable Mechanical and Thermal Loads
The purpose of this paper is to estimate the fatigue life of an airplane wing with laminated composite skin, subjected to variable mechanical and thermal loads. To achieve this aim,at first, the three-dimensional model of airplane wing was drawn in CATIA software. Then, by transferring the model to the ABAQUS software, the finite element model of the wing wascreated. H...
متن کامل