Ex Perimental Verification of the Shape Memory Alloy (sma) Spring Actuator for Application on In-pipe Machine
نویسنده
چکیده
M. Kelemen, I. Virgala, E. Prada, T. Lipták Faculty of Mechanical Engineering, Technical University of Košice, Slovakia Th e paper deals with Shape memory alloy (SMA) spring analysis and its possibility for usage as actuator for in-pipe machine. In the paper the inner structure of SMA is introduced. Further, the experimental analysis of SMA contractor and expander was done. From the experiments was found that SMA spring has several disadvantages like long time of cooling and high electric power consumption. Using SMA spring as actuator for in-pipe machine has been obtained average velocity of in-pipe machine roughly 2 mm/min. Advantage of SMA spring as actuator is its good expansibility.
منابع مشابه
On the Desing and Test of a Prototype of Biped Actuated by Shape Memory Alloys
In this paper the design of a biped robot actuated with Shape Memory Alloy (SMA) springs with minimum degrees of freedom is presented. SMA springs are a class of smart materials that are known for their high power to mass and volume ratios. It was shown that utilizing spring type of SMAs have many advantages as large deformation, smooth motion, silent and clean movement compared to ordinary typ...
متن کاملExperimental Hysteresis Identification and Micro-position Control of a Shape-Memory-Alloy Rod Actuator
In order to exhaustively exploit the high-level capabilities of shape memory alloys (SMAs), they must be applied in control systems applications. However, because of their hysteretic inherent, dilatory response, and nonlinear behavior, scientists are thwarted in their attempt to design controllers for actuators of such kind. The current study aims at developing a micro-position control system ...
متن کاملShape Memory Alloy Actuator forBio-medical application
In this paper various applications of shape memory alloys (SMA) in bio-medical field based upon their material properties are discussed, and a novel SMA spring actuator design for biopsy is proposed. Design parameters such as spring configuration, wire diameter required for designing the actuator were defined and obtained through experiments. Finally, itconcludeswith the possibility of using SM...
متن کاملModeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network
Despite the fact that shape-memory alloy (SMA) has several mechanical advantages as it continues being used as an actuator in engineering applications, using it still remains as a challenge since it shows both non-linear and hysteretic behavior. To improve the efficiency of SMA application, it is required to do research not only on modeling it, but also on control hysteresis behavior of these m...
متن کاملModeling, Characterization and Control of a Novel Torsional Shape Memory Alloy (SMA) Actuator
Thermally activated shape memory alloy (SMA) actuators are direct-driven and produce high power density with design versatility. However, beyond their linear actuation in spring forms there is little variety and their application in robotics is limited by the challenging characterization of the actuator. In this paper we introduce a novel low-profile torsional SMA actuator design, and its compr...
متن کامل