Scatternet Formation of Bluetooth Ad Hoc Networks
نویسندگان
چکیده
Scatternet formation must be addressed before any ad hoc network protocol can be run over Bluetooth. This is due to the frequency hop nature and piconet unit of Bluetooth. In this paper, a protocol stack of Bluetooth group ad hoc network and a “blue-star island” network formation algorithm are proposed. The network formation locates within Bluetooth Network Encapsulation Protocol (BNEP) layer and is beneath the routing protocol. The main task of network formation is to establish and maintain Bluetooth network topology with better performance and in a fast and economic way. The routing protocol is mainly to find the best routes among the existing network topology. The network formation communicates with routing protocol and management entity using “Routing Trigger” mechanism. The “blue-star island” algorithm is a distributed 2-stages scheme. First, a group of neighbor nodes are self-organized into “blue-star island”, where the joint node is slave in scatternet. Then, initiated by “Routing Trigger” from routing protocol, blue-star islands are bridged together. The “Routing trigger” can be “Route REQuest” message or “HELLO” message. The design has no assumption on number, distribution and mobility of nodes. We present discussion and simulation results that show the proposed algorithm has lower formation latency, maintain consume and generates an efficient and good quality of topology for forwarding packet.
منابع مشابه
A Review of Bluetooth based Scatternet for Mobile Ad hoc Networks
Bluetooth based networking is an emerging and promising technology that takes small area networking to an enhanced and better level of communication. Bluetooth specification supports piconet formation. However, scatternet formation remains open. The primary challenge faced for scatternet formation is the interconnection of piconets. This paper presents a review of the proposed approaches and th...
متن کاملAd hoc networking with Bluetooth: key metrics and distributed protocols for scatternet formation
Bluetooth is a promising technology for personal/local area wireless communications. A Bluetooth scatternet is composed of simple overlapping piconets, each with a low number of devices sharing the same radio channel. A scatternet may have different topological configurations, depending on the number of composing piconets, the role of the devices involved and the configuration of the links. Thi...
متن کاملIntroduction to Blueweb: A Decentralized Scatternet Formation Algorithm for Bluetooth Ad Hoc Networks
In this letter, a decentralized scatternet formation algorithm called Bluelayer is proposed. First, Bluelayer uses a designated root to construct a tree-shaped subnet and propagates an integer variable k1 called counter limit as well as a constant k in its downstream direction to determine new roots. Then each new root asks its upstream master to start a return connection procedure to convert h...
متن کاملBluetooth scatternets: criteria, models and classification
Bluetooth ad hoc networks are constrained by a master/slave configuration, in which one device is the master and controls the communication with the slave devices. The master and up to seven active slave devices can form a small Bluetooth network called a piconet. In order to build larger network topologies, called scatternets, the piconets must be interconnected. Scatternets are formed by allo...
متن کاملA Distributed Algorithm for Mesh Scatternet Formation in Bluetooth Networks
Bluetooth is a promising new wireless technology that enables portable devices to form short-range multi-hop wireless ad-hoc networks. Bluetooth Scatternet Formation is one of the challenges that needs to be resolved. In this paper, we present a new, distributed Bluetooth mesh scatternet formation algorithm. The generated scatternet is a connected mesh which, in addition to meeting the minimum ...
متن کاملSF-DeviL: an algorithm for energy-efficient Bluetooth scatternet formation and maintenance
Bluetooth is a short-range ad hoc networking technology, which enables formation of inexpensive personal area networks with low power consumption. Using Bluetooth technology, a small number of closely located devices can be interconnected within a piconet. Building larger ad hoc networks is possible by interconnecting multiple piconets to form a scatternet. As the Bluetooth topology grows from ...
متن کامل