Manipulator trajectory planning using a MOEA

نویسندگان

  • Eduardo José Solteiro Pires
  • Paulo B. de Moura Oliveira
  • José António Tenreiro Machado
چکیده

Generating manipulator trajectories considering multiple objectives and obstacle avoidance is a non-trivial optimization problem. In this paper a multi-objective genetic algorithm based technique is proposed to address this problem. Multiple criteria are optimized considering up to five simultaneous objectives. Simulation results are presented for robots with two and three degrees of freedom, considering two and five objectives optimization. A subsequent analysis of the spread and solutions distribution along the converged non-dominated Pareto front is carried out, in terms of the achieved diversity. # 2006 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimal Trajectory Planning of a Mobile Robot with Spatial Manipulator For Spatial Obstacle Avoidance

Mobile robots that consist of a mobile platform with one or many manipulators mounted on it are of great interest in a number of applications. Combination of platform and manipulator causes robot operates in extended work space. The analysis of these systems includes kinematics redundancy that makes more complicated problem. However, it gives more feasibility to robotic systems because of the e...

متن کامل

Planning and Control of Two-Link Rigid Flexible Manipulators in Dynamic Object Manipulation Missions

This research focuses on proposing an optimal trajectory planning and control method of two link rigid-flexible manipulators (TLRFM) for Dynamic Object Manipulation (DOM) missions. For the first time, achievement of DOM task using a rotating one flexible link robot was taken into account in [20]. The authors do not aim to contribute on either trajectory tracking or vibration control of the End-...

متن کامل

Trajectory Modeling of CaPaMan (Cassino Parallel Manipulator) by using4

In this paper a general procedure devoted to trajectory optimization is presented. This procedure is used for optimizing the trajectory of a parallel manipulator named CaPaMan (Cassino Parallel Manipulator) by using a performance criterion that includes the mechanical energy and the total traveling time. The resulting scalar objective function is then minimized. The trajectory is represented by...

متن کامل

Research on time optimal trajectory planning of 7-DOF manipulator based on genetic algorithm

Trajectory planning is the basis of robot control. A robot with seven degrees of freedom is the object of study. The shortest time is taken as the trajectory optimization target. The joint trajectory planning is carried out by using B-spline curve. Under the constraint of kinematics parameters, the time optimization of the motion trajectory is realized by using the improved genetic algorithm. T...

متن کامل

Maximum Allowable Load On Wheeled Mobile Manipulators (RESEARCH NOTE)

This paper develops a computational technique for finding the maximum allowable load of mobile manipulators for a given trajectory. The maximum allowable loads which can be achieved by a mobile manipulator during a given trajectory are limited by the number of factors; probably the dynamic properties of mobile base and mounted manipulator, their actuator limitations and additional constraints a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Appl. Soft Comput.

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2007