Design, Fabrication and Testing of Assembly Features for Enabling Sub-micron Accurate Passive Alignment of Photonic Chips on a Silicon Optical Bench

نویسندگان

  • J. F. C. van Gurp
  • Marcel Tichem
  • Urs Staufer
چکیده

In this paper, we report on passive alignment with sub-micron precision of two photonic chips on a silicon optical bench. An effective design principle to minimize the tolerance chain is presented and applied to a case study. The chips have been successfully manufactured and individual characterization of the chips revealed that all critical dimensions were within or close to specs. Sub-pixel analysis of images of assembled chips showed that a repeatability of 0.3 μm from a single photonic chip to the silicon optical bench can be achieved. Moreover, it was demonstrated that passive alignment features defined in the waveguiding layers are robust enough to function as mechanical endstops.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Low-Temperature Bonding for Silicon-Based Micro-Optical Systems

Silicon-based integrated systems are actively pursued for sensing and imaging applications. A major challenge to realize highly sensitive systems is the integration of electronic, optical, mechanical and fluidic, all on a common platform. Further, the interface quality between the tiny optoelectronic structures and the substrate for alignment and coupling of the signals significantly impacts th...

متن کامل

Demonstration of Self-Aligned Flip-Chip Photonic Assembly with 1.1dB Loss and >120nm Bandwidth

We demonstrate direct flip-chip assembly of photonic dies with solder-induced selfalignment to sub-micron accuracy. We find a peak chip-to-chip transmission of -1.1 dB with 0.2 dB penalty over the 120 nm spectrum measured. OCIS codes: (130.3120) Integrated optics devices; (250.5300) Photonic integrated circuits A scalable and cost-efficient approach to integration of various photonic chips that...

متن کامل

Photonic module integration based on silicon, ceramic and plastic technologies

This thesis reports the main results in photonic module integration using silicon, multilayer ceramic and plastic technologies. In order to implement high-performance photonic modules the accurate alignment between critical devices and components is very essential. Costefficient photonic modules in volume production can be achieved, when the alignment of devices and components is implemented pa...

متن کامل

Photonic Packaging: Transforming Silicon Photonic Integrated Circuits into Photonic Devices

Dedicated multi-project wafer (MPW) runs for photonic integrated circuits (PICs) from Si foundries mean that researchers and small-to-medium enterprises (SMEs) can now afford to design and fabricate Si photonic chips. While these bare Si-PICs are adequate for testing new device and circuit designs on a probe-station, they cannot be developed into prototype devices, or tested outside of the labo...

متن کامل

Towards micro-assembly of hybrid MOEMS components on reconfigurable silicon free-space micro-optical bench

The 3D integration of hybrid chips is a viable approach for the micro-optical technologies to reduce the costs of assembly and packaging. In this paper a technology platform for the hybrid integration of MOEMS components on a reconfigurable free-space silicon micro-optical bench is presented. In this approach a desired optical component (e.g. micromirror, microlens) is integrated with removable...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012