Oil folliculitis. A study of 200 men employed in an engineering factory.
نویسنده
چکیده
Occupational skin disease is a problem of major importance in the engineering industry. Little is known about the occupational distribution of oil folliculitis and its varying degrees of severity. This investigation was undertaken in an attempt to discover which occupations are at risk and why. The study was conducted at an engineering factory where 200 men, whose daily work brought them in contact with mineral oils, petroleum products, or greases, were surveyed. The survey comprised a personal interview and clinical examination. The object was to determine the severity of the folliculitis and the nature of certain environmental factors which might be associated with the development of this condition. It was found that in the occupations of capstan lathe operator and automatic lathe operator there was a significantly higher proportion of men with the more severe degrees of oil folliculitis. It was also demonstrated that in these occupations men were exposed to oil to a significant degree. The apparent inefficiency of personal hygiene as a preventive measure was thought to be due to insufficient cleansing so that oil was not properly removed from the skin. This type of occupational skin disease will remain prevalent until machines can be so designed as to eliminate or reduce contamination of the workers' skin by oil.
منابع مشابه
Investigation of the Effect of Control Measures on Reduction of Risk Events in an Edible Oil Factory in Tehran, Iran
Background & Aims of the Study: Identification of hazards is one of the first goals of risk analysis. Failure mode and effect analysis method (FMEA) is universally defined as efficient procedures for finding potential failures aimed to remove or decrease the risk which is related to them. This study aimed to investigate the effect of control measures on reduction of risk ev...
متن کاملUse of Failure Mode and Effects Analysis in Improving Safety: A case Study in An Oil Company
Introduction: The Failure Mode and Effects Analysis (FMEA), first of all, identifies dangerous modes in a process and, then, provides proper control measures that are required to reduce the level of risk. This study aims to investigate the risk level before and after the implementation of control measures in an edible oil factory. Methods: This cross-sectional study was conducted in an edibl...
متن کاملOccupational Exposure to Vegetable Oil: a Risk Factor of Blood Lipid Disorder
Introduction: Few pieces of evidence are available about the association between occupational exposure to vegetable oil and the risk of blood lipid problems. This study was aimed to investigate the relationship between exposure to vegetable oil and blood lipid profile in a vegetable oil factory. Materials and Methods: This retrospective cohort study was carried out on 30 male workers exposed t...
متن کاملPerformance and Emission Characteristics of a Diesel Engine with Cottonseed Oil Plus Diesel Oil Blends
aIn the present study a 4-stroke 5hp diesel engine was tested with Diesel oil plus cottonseed oil blends. The blends in different proportions (10 to 50 percent by volume) were tested at constant speed of 1500 rpm. The said engine is operated at different loads and characteristics like Brake power, Brake thermal efficiency, specific fuel consumption etc. Engine performance for blends resulted in...
متن کاملآثار بیکاری بر سلامت و آسایش روانی
There are a lot of studies indicating adverse effects of unemployment on health and, especially, mental health. The present research is conducted in Finland, where the number of unemployed increased sharply between 1990 (3.5 %) and 1993 (19%), which was the fastest in any western country . The first study group consisted of 211 people working at a wood processing factory, at risk of firing, an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- British journal of industrial medicine
دوره 17 شماره
صفحات -
تاریخ انتشار 1960