3D Modelling of In-Door Scenes Using Laser Range Sensing
نویسندگان
چکیده
This paper describes a 3D scene analysis system that is capable of modelling real-world scenes, based on data acquired by a Laser Range Finder on board of a mobile robot. Laser range images directly provide access to three dimensional information, as opposed to intensity images. This characteristic makes range data suited to build 3D models of objects, and in general real world scenes. Results from the complete modelling procedure are presented, starting with the extraction of surface characteristics from range images, approximation of the surface geometry by a 3D triangular surface mesh and the merging of the surface descriptions from different viewpoints into a consistent 3D scene model. Direct applications of this technique include retrieval of architectural andlor industrial plans into a CAD model, design verification of buildings and plants, and update of a CAD model with the real world ("as-built").
منابع مشابه
3D Reconstruction of Real World Scenes Using a Low-Cost 3D Range Scanner
This paper presents a 3D reconstruction technique for real world environments based on a traditional 2D laser range finder modified to implement a 3D laser scanner. The paper describes the mechanical and control issues addressed to achieve physically the 3D sensor as well as the adaptation of some previously developed techniques used to merge range and intensity data and illustrates the potenti...
متن کامل3D Modelling of Under Ground Burried Objects Based on Ground Penetration Radar
There is a growing demand for mapping and 3D modelling of buried objects such as pipelines, agricultural hetitage, landmines and other buried objects. Usually, large scale and high resolution maps from these objects are needed. Manually map generation and modeling of these objects are cost and time consuming and is dependent on lots of resources. Therefore, automating the subsurface mapping and...
متن کاملSurface Modelling of Urban 3d Objects from Vehicle-borne Laser Range Data
In this paper, a method is presented to generate surface model of urban out-door environment using vehicle-borne laser range scanners, which have been developed in Konno et al.[11]. A classification is conducted first, where range points are divided into the groups of vertical building surface, road surface, other surface, window, tree and others, unknown objects. Erroneous measurement are corr...
متن کاملSurface Modelling of Urban 3d Objects from Vehicle-borne Laser Range Data
In this paper, a method is presented to generate surface model of urban out-door environment using vehicle-borne laser range scanners, which have been developed in Konno et al.[11]. A classification is conducted first, where range points are divided into the groups of vertical building surface, road surface, other surface, window, tree and others, unknown objects. Erroneous measurement are corr...
متن کاملEVALUATION OF FORGING PARAMETERS ON AL-7075 AIRCRAFT DOOR BRACKET BY SIMULATION
The purpose of this research is to achieve the optimal parameters for producing forged aluminium alloy 7075 aircraft door bracket by using finite element modelling (FEM) with commercial DEFORM-3D V6.1 and physical simulations with plasticine and Plexiglas dies. Also, forging speed has been examined as the main factor for controlling to produce a part without any defects. The results of Physical...
متن کامل