Non - contact surface charge / voltage measurements
نویسنده
چکیده
Methods of measurements of surface electric charges and potentials using electrostatic fieldmeters and voltmeters are discussed. The differences and similarities between those methods are presented. The AC-feedback voltmeter is also described as an unique method that combines advantages of both fieldmeters and voltmeters.
منابع مشابه
Characterization of Contact Electromechanics through Capacitance-Voltage Measurements and Simulations
Electrostatically actuated polysilicon beams fabricated in the MUMPs process are studied, with an emphasis on the behavior when the beam is in contact with an underlying silicon nitride dielectric layer. Detailed 2D electromechanical simulations, including the mechanical effects of stepups, stress-stiffening and contact, as well as the electrical effects of fringing fields and finite beam thick...
متن کاملCorrigendum: Correlation of p-doping in CVD Graphene with Substrate Surface Charges
Correlations between the level of p-doping exhibited in large area chemical vapour deposition (CVD) graphene field effect transistor structures (gFETs) and residual charges created by a variety of surface treatments to the silicon dioxide (SiO2) substrates prior to CVD graphene transfer are measured. Beginning with graphene on untreated thermal oxidised silicon, a minimum conductivity (σ(min)) ...
متن کاملThe study of surface wetting, nanobubbles and boundary slip with an applied voltage: A review
The drag of fluid flow at the solid-liquid interface in the micro/nanoscale is an important issue in micro/nanofluidic systems. Drag depends on the surface wetting, nanobubbles, surface charge and boundary slip. Some researchers have focused on the relationship between these interface properties. In this review, the influence of an applied voltage on the surface wettability, nanobubbles, surfac...
متن کاملField Dependent Charge Carrier Transport for Organic Semiconductors at the Time of Flight Configuration
In this paper, we used the time-of-flight (TOF) of a charge packet, that injected by a voltage pulse to calculate the drift velocity and mobility of holes in organic semiconducting polymers. The technique consists in applying a voltage to the anode and calculating the time delay in the appearance of the injected carriers at the other contact. The method is a simple way to determine the charge t...
متن کاملSupporting Information for ” Direct observation of the potential dis - tribution organic light emitting diodes under operation ”
Kelvin probe measurements and orientation polarization Previous Kelvin probe investigations of Alq3 films have shown a constant surface potential increase with film thickness (up to 5 V per 100 nm) that is linked to spontaneous orientation polarization of the polar Alq3 molecules but vanishes for various external stresses such as visible light or elevated temperature. This permanent polarizatio...
متن کامل