Modeling of the Steel Manufacturing Processes
نویسنده
چکیده
In this paper, presents the feasibility of deploying RFID for the steel industry as a tool to reduce the production costs. Steel industry that is applicable to RFID-based tracking management system is proposed. The results of this paper proved that the recognition of 100 per cent came from the material input and output and the location, the location indicated 99 per cent detection rate. Therefore, the proposed RFID-based tracking management system was found superior to the existing system in terms of productivity.
منابع مشابه
EFFECTS OF THE HARDENED NICKEL COATING ON THE FATIGUE BEHAVIOR OF CK45 STEEL: EXPERIMENTAL, FINITE ELEMENT METHOD, AND ARTIFICIAL NEURAL NETWORK MODELING
Hardened nickel coating is widely used in many industrial applications and manufacturing processes because of its benefits in improving the corrosion fatigue life. It is clear that increasing the coating thickness provides good protection against corrosion. However, it reduces the fatigue life. Thus, applying a thin layer of coated nickel might give an acceptable corrosion protection with minim...
متن کاملDynamic Modeling of a Robot Manipulator for Opening the Tap Hole of an Electric Arc Furnace
The electric arc furnace (EAF) is used to produce high quality steel from steel scraps. The EAF uses plasma arc to generate heat for melting scarp or direct reduced iron (DRI). The liquid metal should be drained from the tap hole. Manual tapping operation of the EAF in the hot environment around the furnace is a potentially dangerous and time consuming task for the workers. Therefore, it is ess...
متن کاملExperimental Study of the Cutting Parameters Effect on Hole Making Processes in Hardened Steel
Hardened steels are commonly used in wide areas of technologies and industries. In respect of poor machinability of these steels and requirement of expensive cutting tools, study of machining economy is a matter of importance. Thus the present study deals with the economic considerations of various hole making processes. For this purpose, the hard steel samples were machined by conventional dri...
متن کاملTexture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structuree
It has been clarified that deformation and annealing of martensite starting structure can produce ultrafine-grained structure in low carbon steel. This study aims to investigate the texture evolution and mechanical properties of samples with martensite structure deformed by two different forging processes. The martensitic steel samples were forged by plane strain compression and multi-directio...
متن کاملGenetic Algorithm-based Optimization Procedures to Find the Constants of Johnson-Cook Constitutive Equation
Johnson-Cook constitutive equation is one of the most famous constitutive equations that have ever been developed to model the hot deformation flow curves of different materials. This equation is a predefined model in the traditional finite element codes to describe the material behavior in applications such as simulating the manufacturing processes. In this work, two different genetic algorith...
متن کاملSimulation Modeling for Quality and Productivity in Steel Cord Manufacturing
We describe the application of simulation modeling to estimate and improve quality and productivity performance of a steel cord manufacturing system. We describe the typical steel cord manufacturing plant, emphasize its distinguishing characteristics, identify various production settings and discuss applicability of simulation as a management decision support tool. Besides presenting the genera...
متن کامل